One speaker louder


What could cause one speaker of a consecutive pair to sound brighter than the other? Both tweeters are working but one speaker sounds a little louder and sharper. A slight but noticeable difference.
neilmc
Assuming you checked your source/amp then Room Placement can play a small role. If you are listening to CD's then quite often the balance is such that sounds are divided in the soundstage - some left some right.
Have you tried swapping the speakers from left to right? Just a thought, it could be a channel imbalance in the amp.
One possibility is room acoustics relative to the placement of the speakers and your listening position. Window glass, differences in furniture upholstry, wall hangings, rugs, etc. can affect sound.
Assuming that you have indeed confirmed that it's the speaker and not something else, that is, you've swapped them left for right and the sound follows the speaker, then there are only a couple of possibilities:

1. Damaged speaker - a failure in the crossover network could easily cause what you describe, but occasionaly a driver failure will cause it as well.

2. Manufacturing tolerances - just because they're consecutive serial numbers or a supposedly "matched pair" doesn't mean they were perfect to begin with. Speakers are made by people, and people make mistakes.
are you using tubes?????? If so its possible one channel is dying slowly.......Check your speaker cable fittings...Try switching speakers ( leave everything else the same )..Just a couple things..Hope they help...........
Post removed 
i had the same problem for a while it just takes a lot of patients. it is all about first reflection and speaker placement
Post removed 
I swapped them, but there is a real difference. You can still tell they are the same speaker, but one is quieter and less open.
Post removed 
I swapped them, but there is a real difference. You can still tell they are the same speaker, but one is quieter and less open.

Bad news. Next step (if new or recently purchased) is to take grills off and check no packing material is in the way - also check to see if a driver is completely dead and then contact the seller. Otherwise - you might be able to open them up and check connections and contacts and the crossover. What model are these?

Any chance you overdrived them - even briefly by mistake?

Finally you are looking at a repair or replacement driver...
I swapped them, but no difference. You can tell they are the same speaker, but one has an airy quality, the other is more mellow.
You can tell they are the same speaker, but one has an airy quality, the other is more mellow

A dead or half dead tweeter perhaps?
Is there tone generating software that I can use to listen to high frequencies of both speakers?
Post removed