2. amps-preamps
  3. 1377884471

Noise when turning the volumen on bottlehead

I have a Bottlehead Foreplay line stage II that recently started to make some noise when I turn the volumen up/down, but the noise is gone when I finish turning the knob. It has a stepped atenuator and in most of the steps make some kind of loud noise in both speakers, the nose can be heard coming out of the speakers at about 12-15 feet. I already changed the two 12X7 tubes and the noise remained. Any ideas about what can I do fix this problem?
tiofelon
3 responses Add your response
jjrenman
279 posts
 
Try cleaning the VC with Deoxit or similar contact cleaner.
tgrisham
1,291 posts
 
Bottlehead has a wonderful forum with lots of helpful people. Try there.
jtcf's avatar
jtcf
1,617 posts
 
My Rogue preamp did the same thing.The folks at Rogue suggested cleaning the volume control also.I used a lens cloth,the disposable type glasses cleaning cloth.I folded it out flat,slipped it between the faceplate and volume knob until it touched against the pin that connects to the knob.Then gently scrubbed it back and forth,working all the way around.The cloths dry out quickly so I used three cloths total.No more noise,worked great.
Log in to respond
More to discover
80x80
Krell Theater Amplifier Standard
80x80
Ayon Audio AYON CROSSFIRE P/A STEREO AMP
80x80
Rogue Audio M-180 Dark