No image from Vandersteen 2ci sigs?


I'm new to the hobby & just put my system together with 2c's, a CJ MF2200 & a PV 10AL. I can't seem to get the speakers to image well in my room. The speakers are forced to be kiti-corner in the room fairly close to the side walls & rear walls (i.e. every side less than two feet away from the wall, more like 1 foot in spots) No matter where I place the speakers I just can't get a nice image or soundstage. The room does not allow many options for placement & I really have no other choice than place the speakers on the outer edges of the entertainment center. I really love the natural sound of the speakers but am missing the soundstage that I really desire. What can be done in this room?
fishwater

Showing 1 response by stevem815e

Don't give up on the Vandy's! You will have a *very* hard time getting something better anywhere near their price...

First question - have you checked to make sure that the speakers are hooked up in phase? If they're wired incorrectly from the amp you will get no image...

Second - how good is your amp? Unless it is very very good, it is going to have a hard time creating a decent image with the speakers 7 feet apart... You are at the outside of what most amps can do with your distance. Try an experiment; move the speakers out about a foot further and then move them a foot closer together. See if your image snaps into place... If it doesn't, then I would begin to look at your other equipment...

I have used the 2c's as well as the 4's and have always found both to be pretty forgiving compared to other speakers I've used. Sure, room placement makes a difference but I've never had a situation where I wasn't able to achieve an excellent image...

Just a couple of ideas...

I can promise you if you hooked those speakers up to a Pass Aleph amp you would be blown away!!!!!!!!!!!!!

Good luck to you,

Steve