New listening room electrical design


I'm moving to anew house in a few weeks, and trying to figure out the electrical design.
My current room was designed by Rives and I have numerous dedicated lines in it, so, I'm somewhat familiar with the topic.
The new system proposed outline:
New dedicated subpanel, exclusively for the audio components (main located in the garage, adjacent to the new room).
I have 2 speakers (Avantgarde) with powered subs
2 separate JL Fathom subs
2 mono block amps (lamm ML2)
and number of front end component, locate on stand, that going to be on the side wall
(Preamp, crossover, TT and CD player)
I'm thinking:
Two lines with 2 duplex receptacles each to power avant-garde and JL subs
Two lines with one duplex each for Lamm mono blocks
Here is my main question:
For the preamp, crossover, TT and digital I have the following options:
1.   One line with two duplexes for the analog stuff
       Another line for digital
       3 duplex recptacles on 2 separate lines
2. One line (or two) and one power distribution box with 3-4 duplex receptacle, connected to the wall receptacle
3. Two lines hardwired (no wall receptacle and no IEC and power cord in the Power distr. box) to power distribution box, separating analog from digital receptacles inside the box

What is a better approach for the front end components?
Multiple lines feeding one duplex each,
One line feeding multiple duplexes
One line feeding power distribution box?
maril555

Showing 1 response by russe41

When I had my room wired I used nothing but 4x4 boxes with 2 duplex 20a outlets each(4 plugs per box) every 6' with 10ga wire and 2 to 3 circuits,you don't want to open up walls later if you change the room around.I originally seperated amps and everything else with diff circuits but have to say I mix stuff up now and can't hear a difference so I would just make sure you have plenty of outlets, Looks like the replacement for your amp draws a couple of amps(2-3) so thats not much draw, not like your running a 30a ac unit or anything and the frontend equip probably draws less.I would concentrate on good quality 20a outlets like Hubbell or the like and use the screw down connections not the push in style, they don't seem to get a good hold on the wire like the screw down style does.