New Hobby Ultrasonic Record Cleaning

In 2017 I purchased a 6L Chinese-made ultrasonic cleaner w/timer & heater for $100. on Amazon. Made my own rotating set up with a 2rpm 12VDC motor (Amazon $20.), some 1/4-20 threaded rod, rubber grommets and large plastic nuts as spacers (Lowes) and to secure the records to the rod. I cleaned 2 LPs (or 45s) at a time, spaced evenly in the tank. The entire thing cost me about $160. and took an hour to build the frame from scrap wood, mount the motor to it and configure to the tank. Was it pretty-no, but it sure did the trick! TergiKleen is best ($28. Amazon), but Triton X-100 works great as well. I used NO alcohol. Distilled water in all the processes. Run the tank empty 15 mins. to de-gass before each new tank. I got about 22-25 LPs before needing to change. Heat settings at 32-35 C are fine. Cleaned most LP’s about 8-10 mins. After cleaning, I took the rotating spindle out and slid it into my cordless drill. I took a 1-gal pump sprayer w/distilled water in it, sprayed off the records while rotating them at slowest speed in the drill. After that, I used an ionized hair dryer ($13./Wal-Mart) and dried them with that while spinning them on the drill at fast speed. Took a bit of practice, but kept the entire process hands free as to the record surfaces, and was much faster & preferred over rack drying. Slid into new inners and done. Yes-it’s a bit time consuming, but I cleaned well over 800 albums that way. I saved my pennies and recently bought a Degritter- and I am loving the hands free "drop it in and let it go" start to finish. Before I bought the Tergikleen I made my own cleaning solution-4-6 drops of dawn dishwasing fluid, and about 10 drops of Jet-Dri to each 6L tank of water, mixed slowly with a large plastic spoon and it worked beautifully. I got 3 yrs. use from this, and everything still works- so in the end the cost was pennies per clean. I just got the Degritter now. If I had to say the difference in using Tergikleen VS Triton, I would say the Triton seems to reveal a bit more "bottom end" to the records, and Tergikleen is a bit more neutral. You’ll need to experiment yourself, but either one is fantastic. Tergikleen has a 2 yr. shelf life, Triton has none that I know of.

@antinn,
Thanks for the thread, I will certainly check this out.
I also have a thread to post, this is from the Audiophile Man, who is based in the UK. He has a fantastic site with lots of information, reviews, etc- many based on his own experience.
In addition to ultrasonic cleaners and methods, he goes into quite a bit of detail as to surfactants for cleaning.
I highly recommend checking this out.
https://theaudiophileman.com/surfactant-clean-vinyl-buyers-guide/?unapproved=29127&moderation-ha...

@antinn 
You are correct in your information. Kirmuss has been proven to be incorrect in his statements, and recently his products & statements have begun to fall out of favor. While expensive, the Degritter US cleaner is currently the best unit on the market for this type of cleaning. I also agree with @orthomeade- I made my own DIY US cleaner and NEVER had any issue with heat damaging my records, and I cleaned over 800 LPs, plus several hundred 45s. Heat (in the correct temp range) does, in fact aid in the cleaning process. If you are mechanically inclined, you can make a very good DIY US Cleaner for around $150-$200. There is a LOT of info on this out there.