2. cables
  3. 1235078874

need warm and LAID BACK hi-rez/focused power cord

I posted several months ago seeking recommendations for hi-rez, highly focused power cords in the tradition of the TG Audio Silver but with greater warmth or body. I did acquire a pair of Fusion Audio Enchanters and a VD Nite Platinum from the responses to my inquiry. However, after changes in amps, cd player, interconnects, and new Porter Ports, I find myself in need of advice again on the same matter. My system presently is: A Consonance Droplet 5.0 run directly into a Wyred 4 Sound ST 500 driving a pair of custom Legacy Focus clones using Eton drivers/midbass, metal dome mids & tweeters/NHT woofers. Both components are plugged into a PS Audio P 600 equipped with Porter Ports.
I have an Enchanter plugged into both the power regenerator and the CDP and a Wolff Gain with Oyaide Palladium/Gold plugs on the amp. Interconnects (balanced) are either Sunny Cables 1000's or Jungson Golden Dragons.
Speaker cables are Anti-Cables which I run directly into the speakers/crossovers bypassing binding posts.

My system is very detailed with very good focus and staggering dynamics. With good recordings, all is well and I'm quite satisfied. However, on some (many) recordings, horns, piano, and some guitar can some across aggressively. It has been recommended I replace the Oyaide plugs. Perhaps I will. What I would like are some recommendations on hi-rez, highly focused power cords that are to the laid back and warm side. I really liked the VD Nite Platinum but, it was too upfront for my system. Price is a factor in that I would like to spend $600 or less on the used market. Thanks in advance.
lcherepkai
lcherepkai OP
280 posts
 
Sns---A fellow A'goner may do the crossover upgrades though I couldn't possibly afford the kind of caps you mention. I'm certainly out of my league when it comes to $1000 caps. Since I put an Oyaide R1 in the wall and run my power conditioner from there, I hear practically NO bite. I had to play Harry Belafonte's Greatest Hits on CD to make my system bite (if you have this disc, then you know how EXTREMELY bright some of the tracks are). I hope the more affordable cap upgrade will improve focus and maybe bring out a little more detail. But, for all purposes, my problem is fixed. All who offered actual help, recommendations, or advice, thanks so much!
cervan2281
6 posts
 
Hi Martennis:
There is one cord that will probably fit your requirements. The power cord by David Elrod is about the best I have ever heard. The original cost of this cord is around 5K, which is beyond the means of normal mortals! however, you will find them, (Rarely) on Audiogon. Previously Owned cords will sell for 1K to $1400, still very expensive! I believe that if you invest in one of David's miracle PC's, you will never feel the need to upgrade it. It is that good.
I think I know what you are after. Terms like laid Back, focus, haze and clarification are buzz words first initiated by all those tech writers describing and evaluating gear. To put in Lay terms. I think we want clean clear sound with clean layered bass. If you attain the upper and lower registers you seek, the all important midrange should fall into place. I feel that with the proper synergy between components and connecting wire, "Laid Back" along with high definition is attainable. Very often when one perceives a bright presentation, it may be the result of IM distortion. something as simple as stranded wire, delivering the signal nano seconds apart. the resulting output sounds like shrill treble, however is distortion that fatigues the ears. You might try building one yourself, it isn't difficult. With oynaid ends, you can build a very good cable for $150 that would retail for $500 to $1000. Virtual Dynamics has some wonderful instruction videos on the subject. take a peek. Very good luck to you.
Best/ DR Cervantes
cervan2281
6 posts
 
Hello Lcherepkai:
That same Virtual Dynamics site has a Salon area where they show various tweaks and cable building techniques. There is a complete segment on tightening and replacing the Woofer screws, and the reasons why. This is a very informative site. Link below.

http://www.virtualdynamics.ca/eps-1-10
cervan2281
6 posts
 
Hi Martennis:
You might try the Spectron amp with "Sensing Speaker Cables" This class D amp is set apart from all others. developed by the famous John Ulrick. These amps operate at the speed of light, and will blow away any other Class D and almost anything else out there.
More to discover