Need advice on amp to drive Vandersteen 2Cs

There are a pair of TAD 125s (Solid State but, sound tubey) for less than a grand out there. That is what I ran my 2ce's when I had them. I now run my 3s. Read the reviews.

For what it's worth, I am EXTREMELY happy with the way my Rogue Audio Cronus drives my Vandersteen 1C's. The synergy is absolutely perfect, sort of like the amp and spreakers were made for each other. The Cronus' built-in MM phono stage is a great match for my Rega P3-24/Exact 2 analog front end. Happy Listening !

I have been using ARC D70 and SP9 for 20 years. I have plenty of low base when I need it. If Base is important buy the Vandersteen sub. You have to take the time with your choice of music to listen to a good solid state vs tube at a Vandersteen dealer or friend and go from there. Maybe you should buy both used then decide on your own then resell what you dislike. I would guess quicksilver would be a good choice from your music given.

I agree with Dhgee...Keep in mind the Dynaco Stereo 70 for example is only 35 watts per channel. But note that tube watts are more powerful than their numerical equivalent in transistor watts. 35 watts is comparable to about 50 transistor watts! A 60 watt ARC D70 is a fantastic sounding amplifier with an output comparable to a 80 watt transistor amp. The load of a Vandersteen 2C (1987) speaker is also tube friendly, 7.8 ohms nominal 6 ohms minimun. The current 2Ce Signature II is tube frendly as well. Over the weekend I visited my good friend who bought my older 1987 2C Vandersteens. The 2C's are truly a great sounding speaker. He has a very large room and is running them with mid fi 1980's gear , Denon reciever, sony cd player and they still sound very good. Most do not know how great the even older 2C can sound. To the best of my knowledge Richard Vandersteen uses ARC gear to voice his speakers. He has owned Quicksilver amps as well. And if you need more bass performance the Vandersteen sub is the way to go. To my ears the Vandersteens have always sounded best with tubes. Not the big tube amps. But the smaller amps that use the EL34's, KT66's tubes....Just my 2c's...But, you could always call Mr. Vandersteen for more information....

I agree with Dhgee...The ARC D70 is a great amplifier mated with Vandersteens. In fact I beleve that Mr. Vandersteen currently is using ARC gear to voice his loudspeakers. Vandersteen has also owned V4 Quicksilver amps as well to the best of my knowledge. As far as tube vrs transistor wattage. Even the Dynaco Stereo 70, for example, is only 35 watts per channel, but note that tube watts are more powerful than transistor watts. The 35 watt Stereo 70 is really about 50 transistor watts! So, a ARC D-70 at 60 watts is perhaps a 80 watt transistor amp. Something to consider. Also the older 2C (1987) Vandersteen is tube friendly as it's only 7.8 ohms minimum 6 ohms. The newer 2Ce Signature II's are also tube friendly. If you really need more bass the Vandersteen sub woofer is the way to go. I just recently visited my friend who bought my old Vandersteen 2C's (1987). He runs them with mid 80's gear. A Denon reciever and sony cd palyer in a very large room. It sounds pretty good. But many have no idea how great this speaker can really sound. To me the Vandersteens have always sounded best with tubes. I perfer the smaller amps that use the EL-34 tube or KT-66. Just my 2 cents. But, you could also ask Mr. Vandersteen by calling him.....