NATURAL CHERRY VENEER


I left my new Nautilus 805's sitting in the bottom piece of the foam packing they were shipped in, and placed them on top of their boxes (free stands) while I went out of town for a week. When I came back, I took the speakers out of the foam bottoms and noticed a "tan line" where the speakers had been sitting down in the foam packing pieces. Here's the question, Does anyone know for sure, whether natural cherry continues to darken with time, forever, or if it reaches a certain point and then stops darkening alltogether, or slows dramatically??? My curtains were drawn, and very little light was able to enter the room. I believe that they will even out with time, but the Obsessive-Compulsive in me has decided to cover up the "tan" part and let the non tanned part acquire some sun. So.... Bring on the info!!!! Thanks.
gthirteen

Showing 4 responses by gthirteen

Thanks, all. I believe that the tan lines were made in my living room, The curtains were drawn, but (I did not mention this before) they are pretty flimsy, and white to boot. I'll give it a week in the same conditions, if it doesnt correct itself, I'll talk to B&W. Right now I have newsapers wrapped around them, and in it's design, at least, my solution seems to be ok. Today I am going to buy some posterboard and use that, as I can just see Murphy's Law kicking in, and the text from the newspaper being burned into my veneer. Unlikely, but perhaps possible. Thanks again, HEY P_MMK, when you moved the knic knacks on your table, did the marks ever go away???
yES, CARL, BUT DO YOU THINK THAT THE COLOR DARKENED TO A POINT, AND THEN STOPPED (INDICATING THAT if I leave the colored part Uncovered, the color would even out with time) or continued to darke over time (which would mean that if I do not cover the colored part that there would always be a difference in color) ? That is the question....any thoughts????
BMPNYC, as indicated in my original posting, that is precisely what I have done, any thoughts on the part of the original posting that is pointed out to be the question?? thanks.
Thanks, everyone... Mezmo, I recently used a wood scratch repair kit on my floor. Basically it is 3 or 4 crayons ( a little softer than I remember) one is pretty clear, one is light tan, one is light brown, one is dark brown. You just rub the crayon across the scratch, and it fills in the valley. Then you take a little scraper(included) and wipe it down the length of the scratch, to take off the excess. Then use a soft cotton cloth to buff it untill you cant even see it. I'm no wood expert, but it's only wax...and it works pretty good on relatively small scratches, I dunno about dings. I got mine at Lowe's hardware store. Good luck!!!