NAD 3020A Integrated Amp


So I have a series of questions re: a NAD 3020A I just bought on Ebay. I'm just getting started on trying to build a good system so please excuse my lack of knowledge.

1. NAD 3020A Amp hooked to JBL 4312A Control Monitors and new REGA RP-1 Turntable. NAD is replacing a early 90's Sansui RZ-1000. I would have thought there would have been an appreciable difference in sound quality but I'm not sure that there is. Can't tell if it better, worse or just different.

2. NAD delivers a electrical snap sound to the speaker which Sansui did not. Is this cause for concern? Should I have this unit tested / looked over?

3. As this is an older amp it has limited inputs. Is it ok to run IPOD or DVD into the AUX input? Also no CD input, any ideas?
Nate
iamnate
Iamnate,

In my humble opinion the parts and labor will be more than the amount you may have paid for this amp so it is not me who decides. If you are handy with a soldering iron and know a bit about electronics you can do that yourself as suggested by Pryso. If not you need to consider your options

I know exactly what you mean about sound from that era, yes it was musical and warm. I have progressed to tubes and I am blessed with the same kind of sound I used to get from the equipment in question, I owned Quad equipment back in the days and upgraded with another Quad later on.

Here is an option for you to consider in future, as I am very satisfied with what I have now, it gives me the same musical sound as if I was transported back in the 70's and 80's.

What you need to be on the lookout is tube amps from Dared, they are extremely reasonable in price and have the best price/performance ratio under $1000. You can get a used Dared on Audiogon as well as on other sites. I currently use a Dared VP-16 in my bedroom and it is in one word "sweet"

You can get a Dared VP-16 for as little as $350 used (price for new is $895. Another great little model from them is MP-5 (brand new around $550 or thereabouts), You can get them used at much less than a VP-16. Dared has other offerings as well so I suggest you first check out their site when you have time and see what you fancy.

If you have questions or need to know more let me know and I will oblige.
I used to won two of these back when you could buy them new for under $200.00.

They were a refeshing change of pace from most of the over priced stuff in it's day.It was a no frills unit that delivered the goods, and I'll bet it would still compete today with some maintenance.

I'll take a good sounding no frills amp any day to one that is nothing but a collection of knobs and dials and options that degrade the sound.

This is one component from that era that never seems to appreciate in price like some of the other gear from that era, you know the stuuf with knobs and dials and switches and meters.

I used to run a pair of Swisstone 15 ohm Roger's Ls3/5a with one of my 3020's.
This made for some very nice listening.

The Rogers cost $400.00 new back then and the 3020 was $200.00 new.

Both I would consider classics,yet the 3020 somehow never gets any respect, yet it was the amp that was the real competition to all that 1970's Japanese stuff that was more show than go in my opinion.
Most of that gear that is so sought after today,granted was built better than the Nad,but sonically, the 3020 put the money into the parts that made it sound good.
So good in fact, that around the time of the 3020, those big heavey brutes from Japan started to disappear.

You have a nice piece of audio history in the 3020, and it is as deserving of upgrades as any other amp from that era or any other.
The thing I like about the 3020A is that I can bypass the power amp portion from the back and send the signal out to a stand along power amp. I'm wondering if anyone thinks I can get better sound by using the 3020A in this manner just as a preamp if I get a decent Power Amp?
I didn't try the preamp out when I had it (3020), but its worth trying, if it has it. Sometime they sound almost as good as a dedicated preamp. People do it with receivers to, and report good results at times. I've done it with others(brands/models) in the past, and received nice results. It depends how well it mates up to the particular amp you might try, just like a stand alone preamp. A lot of them put the feature on in case you want to go to a bigger amp in the future, but sure doesn't limit you to the quality either. I was satisfied with one setup in the bedroom for awhile, that I used the full integrated for TV, the pre-out for a tube amp for music. That worked fairly good, until I traded, and moved on. Part of the fun of the hobby.
If you still have those 4312a speakers, see if you could get a hold of a Mcintosh 2100 amplifier, at least to try the combo. That amp, and those speakers sound like they were made for each other.