My Luxman Integrated has AC Inlet Envy
I love my Luxman 507ux, it does so many things right, so soon after I got it I built a shielded power cable as an upgrade to the relatively plain cable that came with it.
To make a long story short, after trying out a number of different cables and female IEC plugs it seems the AC inlet has prongs which seem too short. For sure, the Luxman has no ground pin. I'm sure that this means it's not required, so that’s not an issue. What is an issue is that even a Wattgate plug, which are famous for a tight grip, can’t stay in. Even a little wiggle can disconnect the amp.
It seems either or all of these are true:
If I play with a cheap power cord, it seems like the AC doesn’t connect unti lthe very last 2 mm of travel of the plug. This seems wrong.
I bought a cheap replacement inlet and it just feels so much better. Meaning, I can feel the plug grip the pins much earlier, and they all grip much better.
Anyone else have issues with Luxman inlets??
PS - I absolutely insist on building my own power cables. This is my hobby not yours so please stop trying to convince me my problem is that I didn’t buy your boutique brand.
@erik_squires Wrote:
I couldn’t agree more! FWIW, Boulder does it right no standard IEC. See below 1-2: Mike https://boulderamp.com/wp-content/uploads/3060-OM-V3-1.pdf https://boulderamp.com/wp-content/uploads/32A-Power-Connector-Explanation.pdf |
@imhififan Wrote:
I agree! Mike |
@erik_squires Wrote:
I agree, all non locking IEC will not make a good electrical contact because they arc. IME, the money audiophile amps cost they should have locking IEC for the AC mains. 😎 Mike |
@cleeds Wrote:
I agree! Mike |
@imhififan, I buy all locking AC power cords. See below: Mike I use custom made locking IEC AC mains power cords on all my audio equipment. Example in blue see below: Mike Step 1. Choose a PlugSelect... C14 C14 DOWN C14 RIGHT C14 LEFT C14 UP C20 C20 RIGHT C20 LEFT 5-15 5-15 HG 5-20 L5-20 6-15 6-20 L6-20 Blunt ROJ Step 2. Choose a ConnectorSelect... C13 C13 RIGHT C13 LEFT C15 C15 RIGHT C15 LEFT C19 C19 RIGHT C19 LEFT C13 WS-Lock C13 WS-Lock DOWN C13 WS-Lock LEFT C13 WS-Lock RIGHT C13 WS-Lock UP C15 WS-Lock C15 WS-Lock DOWN C15 WS-Lock LEFT C15 WS-Lock RIGHT C15 WS-Lock UP C13 IEC Lock C19 WS-Lock C19 IEC Lock Blunt ROJ Step 3. Choose a JacketSelect... 14 AWG / 3 Wire / SJT 18 AWG / 3 Wire / SJT Step 4. Choose a Jacket Color and LengthColor Length Select... 0.3m / 1 foot 0.4m / 1.25 feet 0.5m / 1.5 feet 0.55m / 1.75 feet 0.6m / 2 feet 0.7m / 2.25 feet 0.8m / 2.5 feet 0.85m / 2.75 feet 0.9m / 3 feet 1.0m / 3.25 feet 1.1m / 3.5 feet 1.15m / 3.75 feet 1.2m / 4 feet 1.3m / 4.25 feet 1.4m / 4.5 feet 1.45m / 4.75 feet 1.5m / 5 feet 1.6m / 5.25 feet 1.7m / 5.5 feet 1.75m / 5.75 feet 1.8m / 6 feet 1.9m / 6.25 feet 2.0m / 6.5 feet 2.05m / 6.75 feet 2.1m / 7 feet 2.2m / 7.25 feet 2.3m / 7.5 feet 2.35 m / 7.75 feet 2.5m / 8 feet 2.55m / 8.25 feet 2.6m / 8.5 feet 2.65m / 8.75 feet 2.7m / 9 feet 2.8m / 9.25 feet 2.9m / 9.5 feet 2.95m / 9.75 feet 3.0m / 10 feet 3.2m / 10.5 feet 3.4m / 11 feet 3.5m / 11.5 feet 3.7m / 12 feet 3.8m / 12.5 feet 4.0m / 13 feet 4.1m / 13.5 feet 4.3m / 14 feet 4.4m / 14.5 feet 4.5m / 15 feet Step 5. Review Prices and Add To CartThank you for designing a custom power cord. This item is manufactured in our Henderson, NC facility. All custom power cords require review prior to purchase. Please continue the checkout process to submit your design(s). You will not be charged without notice and will be contacted by a member of the StayOnline team with pricing and lead time. Custom Molded Power Cord - L6-20 Plug to C13 WS-Lock Connector 0.3m / 1 foot 15A/250V 14/3 SJT BLUE$-- Add this to your cart to save this configuration
Click below to make your custom AC power cord. https://www.stayonline.com/cordbuilder/molded-cord-configurator.asp
|
@erik_squires Wrote:
I agree, I think your Luxman originally has a C-17 C-18 two prong plug. Mike |
