2. amps-preamps
  3. 1279821543

Musical Fidelity V-Can Headphone Amp

I am interested in hearing from anyone who may have this inexpensive headphone amp. It is connected to my Krell amp with a set of Kimber Silver Streaks and am listening with Sennheiser D600's. At first, the unit sounded like a fork scratching a plate, after about 24 hours it calmed down quite bit, but after another 24 hours, no additional improvement. The sound is what I would call accurate, but it just seems like I'm listening to a "tin can quality". I know I could spend a lot more but I do not see myself using it very frequently, however, I would welcome any suggestions on how to get the best of this beast. I was told in three months they are coming out with a better power supply than the wall wart.
Thanks!
rpg
6 responses Add your response
stanwal's avatar
stanwal
3,147 posts
 
Here is the web site for a much better power supply. I have one for my V-DAC.

http://www.rock-grotto.co.uk/musical-fidelity-vcan-vdac-vlps-power-supply.html
afranta
180 posts
 
I had one briefly and wasn't impressed. The sound quality after a couple of weeks was OK, but the real problem was the gain: the volume went from silence to unbearably loud very quickly. I'm much, much happier with the Creek OBH-11 I picked up to replace it. By comparison, the V-Can sounded hollow and shrill. And an "upgraded" Elpac power supply for the Creek can be had for $17.
rpg OP
126 posts
 
Yes, I noticed the volume control would first bring in the right channel slightly before the left and I've learned this is normal. And yes, secondly, with my Sennheiser's, the volume would go from silence to screaming with a quarter turn of the volume pot. There must be some very hard to drive headphones out there!
afranta
180 posts
 
I'd forgotten about the channel imbalance. The usable travel on the volume pot with my AKGs was more like 1/8 turn. They're pretty easy to drive, but those Sennheisers are a 300 ohm load, aren't they?!?
rpg OP
126 posts
 
I'm not sure what the load is with the Sennheiser is, I could measure it, but to what avail, I just need to get used to the pot and be careful. Dealing with 1/8 turn I would imagine frustrating. However, as I'm putting hours on the V-CAN it is starting to sound better. I think I'm going to keep it and deal with the volume issue, considering the low price I think it performs pretty good.

Thanks
rpg OP
126 posts
 
I'm finding as the unit continues to break-in the sound quality is improving. However, yes, the unit does sound a bit shrill. I'm going to give it about 150 hours to break in, which was suggested on another thread. Lastly, my dealer said a new upgraded power supply is coming out in about three months and less expensive than their current offering which can power three Musical Fidelity components. The new one (Ithink) powers one component and is a significant enhancement over the waa-wart.
Log in to respond
More to discover
80x80
Rega Aria MK3
80x80
Audio Research LS28SE
- Vacuum Tube Preamplifier
80x80
Wave Kinetics Deluxe Phonostage