Musical Fidelity strange noise. HELP

Rick Walker will take care of it.

Then the cause is most probably a bad solder joint. I'd send it to Rick at signal Path (last I checked they still are MF service center).

I switched the tube and still has the same static noise from left channel. I kept it on and when the unit warms up like 5 mins, the noise slowly fades away and disappears.
Wonder what I should do next?

I think I had something similar with my M3 I bought used last fall. I could hear a sound like static on the left channel. The bad news is I never figured out what it was; the good news is it went away. Haven't heard it in several months. May yours do the same.

Your problem is either one of two things. When the industry changed over to lead free solder, many manufacturers had some difficulty working with it. MF gear in particular had a rash of "bad" solder joints that caused issues as you describe. The other probable cause would be a tube in the pre-amp section has become noisy or unseated in socket. Open the case up and swap the tubes to the opposite channel. See if that cures the noise or if the noise follows the tube.

Good luck

B