Modifying my Mark Levinson 332 for a unique visual experience

Pyramid is one of the 3 or 4 authorized U.S. based ML centers.
However mohit789 is in India so shipping a 150lb amp from India to Texas is a little silly. Pyramid does not sell any ML parts, not even a speaker binding post :(

@mohit789...you cannot post pictures directly in this forum. The best you can do is upload the photos to GoogleDrive, give the photos share permission and post the shared links here, just like I did with my opening post at the beginning of this thread.  As for the availability of parts, these amps are getting old. Someone correct me if I am wrong but I think the 333 has totally different output devices compared to the 332. I have seen photos of failed 333 boards. They are not pretty and they die a violent death. This may be partially due to the way the MOSFETs are internally mounted and flash up, carbonizing everything around them. The 332 uses external TO-3 can-type output devices. With that being said, I don't imagine there are a lot of failed boards that can be re-worked in the service channel. I don't know if Harmon still makes new boards for this model. They may be refurbishing boards at this point and you may be waiting on a good donor board. I am making assumptions though.

Harman luxry audio said “Referring to the pictures that you provided on 6/5/18, I have confirmed that one of the boards that are needed for the repair, the No. 333 Current Gain (aka 'main') board is no longer available.”
then i asked to repair my board then “Unfortunately our technician at our US service center United Radio has advised me that the CG board has been damaged beyond repair.
Now what? Seriously i am stuck on that. 
Ill post the pics and update the link . 

Now please help me . If any one can do. I recently bought it , after two days of use it suddenly died. 

Link of burn boards.
https://drive.google.com/open?id=1hIi98IqFIDbGY2oNee33sY1SDeLHnfYJ
And
https://drive.google.com/open?id=1ej34RIJWNcuqpLqaarw2RlFW1WDzaRj6

After looking at your pictures I have to correct myself. Your boards look exactly like the 332 boards. Your model just has a higher number of output transistors. The 332 has 24. The 333 should have 32. The photos of ultra violent failures that have been burned into my memory are from 336's that have internally mounted MT-200 style FETS. Sorry for the mix-up, as I don't get the opportunity to touch a lot of the other models.  Your current gain board looks pretty toasty. Some of those traces are probably vaporized. The only way to make that board work again is to clean it ultra good, cut out carbonized areas and get crafty with jumpers but it is going to be ugly and you could induce stray capacitances, etc. The components in that area of the board are readily available. The ideal repair is going to require a donor board for that channel. The voltage gain board looks like it may be salvageable in the proper hands. It is going to need a good cleaning and inspection but you may only need to replace those two small capacitors if no traces are damaged. You did not include pictures of the main board but that would plug in on the opposite side from your thermal event so it is probably still good. I would get manufacture dates from those main caps. The minute I saw them I recognized them as the original style Phillips caps. They have a high failure rate and most DIY techs replace them with Cornell Dublier caps. A secondary mylar shield is also now required between the caps and the aluminum frame to keep the outer body of the cap isolated. I imagine the caps expand and contract slightly and eventually rub through the original blue mylar coating. This is a documented inspection and repair point on all of the amps in this series. I would caution anyone against getting a replacement board and just plugging it in hoping it will bring the amp back from the dead. A faulty component upstream on another board could take out the donor board all over again. Comparative probing between the known good channel and the other channel will make swaps a lot more safe and help identify obvious bad components. Also you need to have the amp on a variac or some other current limiting method with the voltage dialed down to the minimum required to just make the amp operational. This will minimize violent failures during testing. The fuse on the amp is NOT going to save you. These amps have insane power reserves and will vaporize anything it can if you give it the opportunity. The amp is basically controlled lightning. I feel your frustration. I hope you do not have a lot of money into it. The best thing to do is wait for a scrapped out unit and buy a used current gain board or buy another used amp and make one good amp from two. You will eventually find a board or a good deal on ebay but it will take some time and a lot of patience. People trade in bad amps for new ones at high end audio shops. Most audio shops don't want to deal with violent failures and they can't get ML parts so they eventually part the amps out. I was lucky enough to get some ML boards from a police raid auction but it took a while. From reviewing the photos of my amps internals it seems the current gain board is ambidextrous, so you don't need to get a channel specific board. The thermal switch TS1 is on the upper right-hand-side of the board on both the left and right channels so outward appearances indicate they are the same board. If I happen to see anything I will make a note here.

@ @chazzzy007 Thank you for the feedback!