Main line voltage from PG E

116 would be a 3% drop in voltage. Your system is probably rated 115/120 look at the name plate or manual. Even if it is rated 120v it will handle a 3% drop. The trick is not to drop any between your service and the outlet that runs your equipment. I would recomend going to a #10 dedicated circuit for a run under 200' and # 8 for a run 200'-300'. This should do the trick for voltage drop. Test the voltage with a meter at your service then check it at the outlet that will let you know what you are dropping now.

Hello, Dekay, I live in central calif (Yosemite Nat'l Park) and from here to Sacramento PG&e is the power co. I guess you have Edison. PG&E is the one that filed bk. Meanwhile I guess I will contact PS audio and see what they have to say. Thanks to all for the info so far.

If you feel that you need the voltage, you can wire up a small boost transformer and plug it in series with your power cords. A 6 volt boost would give you 122v. The only worry would be if they turn the juice back up. The transformer wouldn't be that large. Only big enough to handle the wattage associated with the boost amount. The transformer would be a 6/32volt X 120/240volt.

PS: I live in the LA area (West Hollywood) and as far as I know we only have two electrical utilities.

I have an API conditioner with an alarm hooked up to our computer and for periods of months at a time, the voltage has dropped enough to set it off many times a day. Your equipment will probably sound the same as it does now. A power regenerator (such as PS audio) should keep the voltage steady I would imagine. I used to use voltage regulators on test and sonic welding equipment, but have never seen them used on audio equipment (even by EE's who were also audiophiles). I have heard that low amperage (long term) is what puts additional stress on components (not a minor change in voltage). Low amperage for example will cause quality light bulbs to burn out in a week or two.