My own experience with mach2music is actually excellent. Kevin Burke was very helpful in getting me up and running and the result is a very musical system. PureMusic is really very transparent and harmony-rich and via my Zodiac Gold + Voltikus I am amazed at the improvement over CD via AudioAero Capitole 24/192 SE, in both cases direct to my Wavac EC 300B. The amount of tweaking in computer audio still is an issue; for the record in my system I prefer memory play in hog-mode WITHOUT upsampling on less-is-more. switching off all I/O intensive OSX features such as screensaver, spotlight, etc. is important. Furthermore using a dedicated rather than shared USB bus is a must and linking the hard disks via firewire is preferable. All of this obviously goes beyond what a 30 min session, which mach2music offers can convey.
Mach2Music mini and Amarra : Huge disappointment
I invite all the fellow Audiogon members than own both the Mach2Music Mini and Amarra to share they experiences.
Mine has been a huge disappointment .
The sound I get from the Mach2Music mini even with the advantage of playing Hi-Res files is mediocre at best and way inferior to the sound of a common CD.
Mach2Music tech support after checking that every setting is correct and everything is as it should dropped the ball. They blame the mediocre sound I'm complaining about on Amarra newer version of software they say more stable but sounding not so great.......
To me It doesn't add up. When there are problems the old music start playing: It's someone else fault. May be it's just that the Mach2Music mini is not so great as some say to start with.......
After spending over $4000 on the Mach2Music web site purchasing all the best available upgrades to possibly get the best possible sound from this computer based system, including their top of the line cables (power, USB, Firewire) an optional solid state SSD hard drive besides their special sandwich case to reduce vibrations and the expensive software Amarra, I get instead the sound you would from a cassette player.........at least that's how it sounds to me in my audio system....
My audio system as you read below is of high quality and well balanced where everything from acoustic treatment to power treatment has been closely matched starting from a dedicated room 20x24x9H fully treated with massive use of acoustic diffusers Gikq7 and bass traps Soffits and Tritraps by GikAcoustics.
Audio components connected to the Mach2music mini are:
DAC : dCS Debussy 24/192
Pre: BAT VK52SE upgraded with 6H30DR supertubes Reflector 1987.
Amp: 2x BAT VK600SE Mono
Transport ; Oppo 95
Speakers ; Magnepan 20.1
Speaker cables : MIT Oracle Matrix HD90
Interconnect : MIT Oracle Matrix XLR
Power: 2x Torus RM20 (one x each amp on two dedicated 20 amp circuits)
Power cords all MIT Oracle ZIII
Audio rack Adona Zero reference
All internal and external stock fuses replaced with HiFi Tuning Supreme.
I rarely write on the forum but this is too big of a screw up to pass and I hope to save to somebody the frustration I went thru.
Besides if some of you has a very positive experience with other computer based systems please share . Help is always appreciated.
I hear good things about Solos by Meridian or the USB Thumb reader by Bryston and I'll probably move on one of the two.... life continues......
so if you'll see my Mach2mini for sale on Audiogon in the near future you already know why..............................
Mine has been a huge disappointment .
The sound I get from the Mach2Music mini even with the advantage of playing Hi-Res files is mediocre at best and way inferior to the sound of a common CD.
Mach2Music tech support after checking that every setting is correct and everything is as it should dropped the ball. They blame the mediocre sound I'm complaining about on Amarra newer version of software they say more stable but sounding not so great.......
To me It doesn't add up. When there are problems the old music start playing: It's someone else fault. May be it's just that the Mach2Music mini is not so great as some say to start with.......
After spending over $4000 on the Mach2Music web site purchasing all the best available upgrades to possibly get the best possible sound from this computer based system, including their top of the line cables (power, USB, Firewire) an optional solid state SSD hard drive besides their special sandwich case to reduce vibrations and the expensive software Amarra, I get instead the sound you would from a cassette player.........at least that's how it sounds to me in my audio system....
My audio system as you read below is of high quality and well balanced where everything from acoustic treatment to power treatment has been closely matched starting from a dedicated room 20x24x9H fully treated with massive use of acoustic diffusers Gikq7 and bass traps Soffits and Tritraps by GikAcoustics.
Audio components connected to the Mach2music mini are:
DAC : dCS Debussy 24/192
Pre: BAT VK52SE upgraded with 6H30DR supertubes Reflector 1987.
Amp: 2x BAT VK600SE Mono
Transport ; Oppo 95
Speakers ; Magnepan 20.1
Speaker cables : MIT Oracle Matrix HD90
Interconnect : MIT Oracle Matrix XLR
Power: 2x Torus RM20 (one x each amp on two dedicated 20 amp circuits)
Power cords all MIT Oracle ZIII
Audio rack Adona Zero reference
All internal and external stock fuses replaced with HiFi Tuning Supreme.
I rarely write on the forum but this is too big of a screw up to pass and I hope to save to somebody the frustration I went thru.
Besides if some of you has a very positive experience with other computer based systems please share . Help is always appreciated.
I hear good things about Solos by Meridian or the USB Thumb reader by Bryston and I'll probably move on one of the two.... life continues......
so if you'll see my Mach2mini for sale on Audiogon in the near future you already know why..............................