2. analog
  3. 1082840366

loading impedance

I have a zyx r1000 cartridge, per the manufacture's web page, the recommended load is >100 ohms ( I would think there should be a exact # that the phono section should be set to). The preamp that I have is adjustable (with some effort). What should the impedance be set in the phono section? I have heard some complicated methods of checking impedance of cartridge etc. How does it affect sonic characteristics if I were to change from a 600ohm to 100ohm resister?
eralff

Showing 1 response by rauliruegas

rauliruegas
13,125 posts
 
Dear friend: The ideal is that with the correct load impedance the frecuency response of the cartridge will be flat, but you need some tools and instrument to do that. So, if you are experienced in live music then you have to trust in you ears: take 3-4 records that are your standard and that you know extremly well and try differents impedance values till you are satisfied. Remember that the impedance ( in phono cartridges ) function like an equalizer. Be carefully.
Best regards.
Raul.
More to discover