2. amps-preamps
  3. 1154092665

Levinson 20.5 monos - Time for a Refurb?

I bought my Mark Levinson 20.5 pure class A mono blocks new in 1990. I loved them for their sound and still do. They have been 100% reliable and I have never had them back to the Levinson or my dealer for anything.

However, they are 16 years old now and except for my Magnum Dynalab tuner, they are the only thing I have not replaced in my system.

Being pure class A amps they run pretty hot.

Question is, is it time I should consider having them checked out, refurbished, capacitors and the like replaced, etc?

If so, who should I consider for this work? Levinson? They are not what they used to be when they designed and made these amps, and I'm not sure they are up to the same quality work they did back then or whether I should trust that their parts will be as good as the original. Someone else? But who?

Has anyone been through this or does anyone have any thoughts about this they can share with me?
cipherjuris

Showing 1 response by gregm

gregm
3,411 posts
 
To re-confirm the obvious, do replace those caps and also check other vulnerable components as suggested above.

I also VERY strongly recommend you find/purchase/otherwise obtain the SERVICE manual for your amps. Had you had that now, you could have changed caps (usually no big deal) yourself as well as checked all the tests points to see if anything else needs looking into.

Lastly, low voltage caps & resistors cost very little. Of course, the "safety factor" of having Harman service yr amps is very important; however, given a service manual, a competent & experienced electrician -- or experienced & knowledgeable diy friend could do the actual job just as well.
More to discover