Lamm LP2 Deluxe vs. Manley Steelhead


Has anyone (mike lavigne, gladstone, etc.) had the chance to A/B the Lamm LP2 Delux with the Manley Steelhead; and if so, with what cartridges and associated gain/loading? Although, I like the flexibility the Steelhead offers (over the Lamm), I was a bit concerned about the Fremer's 12/02 comments that the Manley "can sometimes sound a bit mechanical on top." Appreciate your thoughts.

Regards,
rvlardon
128x128rvlardon
I think the mechanical sound referred to is a result of the Sovtek 6922s in the Manley--I've retubed mine and found it to be absolutely stunning. Though I should say it was a winner out of the box.
I'm tired of phono stages like the Lamm that are a pain to deal with as far as cartridge loading issues. Fine-tuning the adjustability is a real plus on the Manley.
Gladstone, Happy Holidays! when you need adjustability it becomes essential. but if your cartridges have enough gain and work well with a 400 ohm loading that comes preloaded on the Lamm then why complicate things?

i have 4 cartridges from .2mv output to .85mv output that all work great with the Lamm.....and that is even with a passive preamp and only 90.5 db efficient speakers.....which you heard for yourself when you were here.

your 'rolled' Manley may be better than the Lamm but the Lamm has the gain and loading that works well for most MC cartridges.
Mike, Glad to see how we are spending our Holiday! Interestingly enough the factory preset input impedance is 40 not 400 ohms for the LP2 according to the specs on Lamm's website -- that is what really had me concerned as I found it unusually low. I'm beginning to think that there must be other factors that come into play that preclude one from comparing various load presets from one mfgr's phono stage to another. Perhaps apples really aren't apples?
Mike/Gladstone,

Since you guys are some of the more knowledgable analogue guys around, would you both look at my audiogon query, "MCs to load or not to load: that is the question" posted a few days ago. I'd appreciate your specific input. Thanks!
Gladstone,

Could you tell me what replacement tubes you used in your Manley, their cost and if anything else had to be done or did you just do a plug and play? Thanks.