Krell KSA-200s First Time Use


Ok in experimenting with the KSA-200S for the first time, in plugging it in to the wall socket (not connected to speakers or anything else) it comes on for a few seconds, then shuts off. Any ideas as to what is going on? Is this normal?
professorjohnkercheval

Showing 7 responses by audiolabyrinth

Hi, You need a dedicated 10 awg electrical cable going from your inside breaker box to the receptical you are going to use, you need a 15 amp breaker, your amp is shutting off because you do not have the current to make it operate!, The receptical you have now is also sharring the power with other recepticals, most homes have daisy chained one receptical to the next!, also, you need to make sure you are useing a 20 amp receptical, your amp will starve for power other wise, never connect your krell to a power conditioner, the same will happen!, Hopefully, your amp is going thru a safty mode to protect its self because of under current and voltage, keep me posted, I will do what I can to help.
@ BRf, Hi, Read the ops post above again, He tried to use the krell ksa with a standard lighting wireing, right now, the breaker 15 amp or 20 amp has nothing to do with it, The op needs to run a dedicated 10 awg electrical wire in attic from breaker to receptical being used with a hospital grade 20 amp receeptical, then he can install a 15 amp breaker or a 20 amp breaker, I really believe he needs a 15 amp breaker, LOL!, My amp is a krell 700cx running on 6 ohms speakers with a 20 amp breaker!, thats 1,050 watts a channel!, If a 20 amp breaker can run that, why in the world would he need a 20 amp breaker for such a low powered krell amp?, However, I am going to do a 30 amp breaker, just to run smoother and result with a few percent better sound, keep in mind thou, the my amp runs very good with the breaker I have,the op needs the 15 amp breaker to better protect his investment, a 20 amp breaker takes more to flip when something goes wrong, he does not have the power as I do, cheers.
@ Brf, Hi, If the op does not have problems with the krell amp its self, I assure you that I am correct, there is no way a krell amp is going to work without a dedicated line!, The amp draws to much current!, LOL!, I tried that once with a krell fpb 200, you should have seen the bulbs in the house flicker and some blew, and guess what, the amp would shut off to stand by quickly!, how do you know the op has a 15 amp breaker now?, If he does, LOL!, thats a 15 amp breaker for a room or two rooms in the house, not a single receptical that his amp is plugged into!, regardless, I hope we can help the op here,I have 18 years of exsperience with krell amps!, The ONLY krell amp that I could ever run on standard house wireing receptical was a krell 300I intergrated amp, everything else had to have a dedicated line with a 20 amp breaker to work!, the op can use a 20 amp breaker for his krell ksa 200s and still work, His problem is he cannot share power to the amp with anything else!, cheers.
Hi, what I have been tring to say, it seems no one understands, I am tring to say that the ops krell ksa 200s amp has to be sharring power with something else in the house, and the breaker he has is tripping because its to much, and the amp is starving, so it shuts off because of the lack of sufficient current, if the op just runs a dedicated line and circuit, btw, is cheap to do, if the problem then is not solved, his amp has damage!, the amp should work correctly when its not connected to speakers, my krell does, and all the krells I have ever had did too!, cheers gentleman.
@ Vegasears, Agreed!, Your post is exactly what I am tring to say!, @ Brf Hi,vegasears has the answer to your question in his post that I would have said, another answer BRf would be his amp may be damaged, the other would be the safty breaker inside the amp is working before the house breaker does, recently, my amp flipped to standby all the time, it did not flip the house breaker, I had issues with the amp thou, another reason I had the amp completly renewed, I am not saying the ops amp has issues, that would be a bummer if he bought a faulty amp!, cheers.
@ Minorl, Hi, BRF said that the ops breaker was tripping!, I thought maybe he talked to him?, so my conversation was related to the breaker tripping, I never assumed that!, your theory is exactly what I have been saying here, man, I must talk foreign or something, LOL!, yes, where is the op?
@ Brf, Hi, The safty precautions the amp has built into it does this, In my exsperience, thats what happened to the amp I have now before I sent it to krell for renewl. where is the op!, Please give us an update, cheers.