2. speakers
  3. 185674-154981

Klipsch Cornwall IVs KC62 and yamaha AS2200 setup questions

First off. Thanks

1. The yamaha has pre-out and line out choice. Which do I use? The manual says Pre-out

2. Cornwall is rated down to 34hz where should I set the KC62 crossover? Currently I have it set to 50hz

3. Ive noticed when i use pre-out there is very little sound coming out of the sub. Even with the sub at max volume. If I use Line out there can be a ton of volume but I have to volume match the sub manually every time i change the amplifiers volume. As you can probably tell Im a new to this subwoofer stuff.

4 KC62 has a High pass filter dongle. do i need to use that?

Again thanks in advance

paqua123

Showing 1 response by elevick

elevick
2,636 posts
 

1-Why cross over at all?  The Cornwalls are known for great bass.  Go full range to the speakers.  Run from the Yamaha direct to the speakers.

2-Try without the sub and see if you are happy.  I would be.

3-Pre-out on the amp should control sub volume.  You may not hear much. Set the sub as low as it will go or see if manual mode will work?

That's the idea of a good sub match.  It will just compliment the bass.  You just might have more speaker than sub.

More to discover