2. speakers
  3. 1172408871

Kappa 9. Parasound HCA-3500 WILL NOT power them

I purchased a pair of Infinity Kappa 9's a few weeks ago. I had the Infinity RS3A's and decided to sell them and upgrade to the Kappa's. I first hooked them to one of my Denon POA-2400 200wpc amps. Not enough power. So posted this problem on here and after some research I decided on the Parasound HCA-3500 350wpc dual mono amp. So I bought one from a real nice guy here on audiogon. I hooked it up last night and this thing won't power them! The amp gets real hot fast. It clips when turned up and the speakers sound like crap. We hooked up a pair of Infinity SM-152's to a Denon POA-1500 150wpc amp next to all this and it sounds better! Also, I think I blew one of the soft poly mid-ranges. The yellowish white rubber on the mids turned clear around the outter edges after listening to moderatly loud music. I'm really frusterated. Three thousand dollars later my stereo sounds way worse and I can't turn it up as loud as I used to. Does anyone have any advise? Could there be a short in the speakers? Why did my midrange blow? What amp should I buy now?
400bill

Showing 2 responses by ghass1

ghass1
2 posts
 
I have a pair of Kappa 8's and use a Citation 7.1 amp bridged to drive them it has 130 peak amps of current.
Check the bass current limit switch on the right of the Xover, set switch to normal. I have cranked mine up loud enough that I don't need a Subwoofer.
ghass1
2 posts
 
Kappa 9's dual 12's can draw a lot of current, the Mid Bass Coupler driver is very delicate and have heard of many people blowing them by trying to overpower the woofers, the best way to drive them is get a high current amp to drive the woofers and a good amp to drive the mids and highs.
More to discover