Jantzen Wax Coil or Mundorf M-Coil CFC


Hi Everyone,

Need to build a new crossover for my Tannoy Monitor Red. My first choice for inductor is Mundorf Copper Air , M-Coil CFC. But it don't have the value I need and so I have to ask Mundorf to custom made it for a price. Then I found the Jantzen Copper Wax Coil, which looks fancy and cheaper. However, Can't find any review online. 

I am wondering if anyone has experience with these coil and which is better? 

thanks
Vic
viclauyyc

Ooops sorry (brain fart), saw Mundorf, Jantzen and M and thought cap.

If that’s the case get over value air coil ones and with cheap inductance meter, take some winding off till you reach your preferred inductance.


Cheers George

If the originals are air core and replaced with good quality air core with the same inductance and same dc resistance as the originals, I don’t think it matters too much.

But if you replace an iron core with an air core of the same inductance and dc resistance, then you "may" hear a difference, as an iron core will saturate earlier than an air core on big transients.

They sometimes use iron core chokes (coils) as a cost cutting (less copper needed) and for smaller physical size.


Cheers George