2. tech-talk
  3. 191946-197971

Issue with Krell KSA-250

Hello-

It's been a minute since I've been on the forums here, but I'm glad they are still around!

I am the second owner of a Krell KSA-250 amplifier. For the past 10 years it hasn't given me any problems. Then today, when I turned it on, it emitted a rather loud buzzing sound. This wasn't coming from the speakers (like a ground loop hum), this was a very startling almost "mechanical" buzz sound. The buzz does not stop until I turn the unit off.

I'm not sure where to start. I called my local audio repair store, but they don't work on Krell. They suggested I contact Krell, which is my next step, but seeing as I'd have to freight this for it to be repaired, I'm hoping someone here might shed some light on what's happening. I've made a short 15-second video of the issue, but I don't think I can upload it here. I'm happy to provide it though.

Any thoughts you might have would be appreciated.

Thanks,

Blake

blakeh

Showing 1 response by gs5556

gs5556
1,241 posts
 

What I would first start to look for:

Check for DC at the wall outlet. Check if the transformer cover can be moved by hand, if so then look at the bolts holding down the cover. Remove the cover and see if the rubber or elastomer bushing is still intact.

That is a 60hz buzz so it’s an AC issue, and it’s either the transformer or the soft start relay coil (those are the only two ac inductors I can think of). If it’s the transformer, then it’s probably the bridge rectifier has an open diode and only 60 hz is getting to the secondary instead of 120hz. If it’s the relay, then its probably a shorted rectifier diode, sending ac instead of dc to the coil and causing the contacts to chatter.

More to discover