effective length on Rega arms is 240mm with the pivot to spindle distance at 222.8 mm. The mounting hole is 23mm dia.
FYI- Nearly all Basis 1400's to date have been factory drilled for Rega. If the location seems correct but the hole is larger than 23mm,the B1400 was set up using their optional VTA adjuster sleeve.No problem but you'll need to take a little extra care before bolting it down tight.
Best,
Ken
FYI- Nearly all Basis 1400's to date have been factory drilled for Rega. If the location seems correct but the hole is larger than 23mm,the B1400 was set up using their optional VTA adjuster sleeve.No problem but you'll need to take a little extra care before bolting it down tight.
Best,
Ken