Info on CM Labs


Hello,
My friend and I have a CM Labs 912, we were wondering if anyone had any kind of spec's on this amp. Neither of us have been able to find anything about it so far, the only mention of this particular amp has been on this forum, so I though that I would check on here if anyone has info.
coldpyro21
Hi !

I own a CM912A, that was defective when I got it. I had to reverse engineer it to have a schematic to work from. I could send you a copy if you are interested. For your information, it puts out around 180 Watts into 8 ohms, and should provide almost the double into 4 ohms considering the size of the power transformer and filter capacitors, but I haven't measured that.

On the other hand, the wires that go from the feedback Cinch-Jones connectors to the amp PCBs were removed at some point, and I would like to reconnect them. On the PCBs you can see what's left of 3 wires, a white one, a grey one and a green one, but I don't know what pins they go to on the Cinch-Jones connector. If you still own the amplifier, would you be kind enough to send me a picture of that connector so I can identify the pins? 
Hi Couldpyro21!
You need for 5 years info's and other technical shema or Specifications.
I hope your find answers...
If you receive technical infos, im verry happy when you send my your information and others technical draw or other Schema for this amp.
I have differents problems with the separable "Power Units"...
Greetings!
I think that member Ferrari has/had that amp. He definitely has info on the line, if you are interestsed. I had CM separates in the late 70s and they were among the best at the time. Manufactured in CT.
It had a 100W/C pwr. rating which few amps could equal in it's day. An early hi end unit.