I just bought a Steinway which sounds like a banjo.


I have a question: I’ve seen a lot of terms in audiophile jargon: laid back, top end, low end, harsh, soft, smooth, etc.
I don’t understand them. I only listen to recorded music, almost nothing synthesized. So the adjectives I know are: pitch, timbre, dynamics and spatiality. I cannot think of sound characteristics that are not inscribed within these four adjectives.
I believe that a sound reproduction device must first of all take care to satisfy these 4 characteristics.

When I read that a loudspeaker sounds harsh to me it means that the timbre is wrong because nobody would describe as harsh the reproduction of an instrument that has a harsh timbre. That would be a speaker that has a correct timbre. It can only be described as harsh the reproduction of an instrument that does not have a harsh timbre. The same goes for the other terms listed at the beginning. For spatiality it is even simpler because it is a geometric, spatial question. An ensable of which occupies 5 meters must sound like an ensambe that occupies 5 meters, not as one that occupies 2 meters nor as one that occupies 20 meters. Then the dynamics is linear so it is the simplest of all.

When Steinway puts a Steinway on the market it does so by taking care of a certain amount of objective characteristics, i would say 96-98% and 2-4% are probably left to the "character" of the instrument.

In the audiophile field, judging by the immense difference between one reproduction technology and another, it seems that the opposite meter is used, that is 4% of objectivity and 96% of character.
As if a Steinway sounded like a forgotten Pleyel in a basement, and a Pleyel sounded like a Boesendorfer. The whole is defended with sword drawn by the audiophile community as and cleared as subjective perceptions or eventually as an incompatibility between the elements in play (source, amplifier, speakers, cables) Hahah! Obviously, if all the products that follow the 4% objectivity meter and 96% "character", it takes a lot of luck to have a system in your hands that allows you to recognize a Pleyel from a Steinway.

When will sound reproduction become serious?
128x128daros71

Showing 2 responses by donavabdear

Terminology is wonderful, in the studio every producer, engineer and musician must communicate with terminology that is meant to relate a feeling in the sound. Very rarely will a musician say I need 605hz taken down 3.5 db but it does happen sometimes.
Pianos are very hard to record because of phasing (a term not on your list) when you have a lid on the piano there are phasing issues by definition, when you have 2+ mics out you have phasing issues by definition. Creative people come up with new terms so an engineer can turn that feeling into technical manipulation of the signal.

When will sound reproduction become serious? 

Answer
When audiophiles use the same equipment as in the recording studio. And pay much more attention to the acoustics in their rooms.

Terms are used all the time in recording they are just a reference and usually don’t mean the same thing to everyone, as a mixer it’s your job to understand the producer and musicians terms, it’s part of the fun of recording.