2. analog
  3. 1107481389

I damanged my Shelter cartridge, next steps?....

Hi Folks:
Well, I managed to damage my Shelter 501 mkII by, well, bumping into it. So, to cut a long story short, the stylus is leaning to one side horizontally, and is pointing more steeply vertically (wider angle between end of stylus and body of cartridge). Finally, the stylus appeas to be more 'springy' and is not as rigid.

So, question is, can I salvage it? Should I try to orient it correctly, or can it be 'reseated'. The stylus does not appear to be bent or broken - just out of correct orientation, and a little loose. Anyway, I'd value advice on whether this can be fixed, and who I might bring it to for such a fix. The cartridge is about 2.2 years old and has about 250 hours on it.

Looking forward to hearing any recommendations on next steps. IF I have to replace the cartridge, I'd also welcome input on replacements. I've a teres 255 with OL Silver Arm. Preamp is Supratek Syrah.

Thanks!!!
John.
outlier

Showing 3 responses by cardiackid

cardiackid
63 posts
 
Did you consider Ezpert Stylus in England. Check out there website for more details.
cardiackid
63 posts
 
Outlier,

Others have had pleasant results with Expert so I would suggest you consider all options. Since you will require more than a simple retip, i suggest that you understand the track record of each company for the rebuild. Another key point is how close to original spec will the repaired product be.

With the current exchange, all Euro transactions will be hefty. The main thing, don't give up on a professional repair until you have all of the facts. Is van den Hull an option? I am not sure.

Good luck, you have many good options suggested.
cardiackid
63 posts
 
I appreciate you point, and if Benz is the place to go, that's fine. The main thing is to be sure that repair options are well considered before discarding the cartridge. That 501 may be a great back-up cartridge after repair.

Also, I guess I am an outsider, but I thought Van den Hul repaired their own. Live and learn. Thanks for the update. This thread may come in useful for me too!

Happy listening
More to discover