I have been using 2 systems in the same room for 20 years: This way each system can be optimally set up. To get the best HT performance, you need to have a wider placement of the main speakers which in most cases will adversely effect 2 ch performance. The 2ch setup does not provide the big expansive wall to wall sound because of width restraints. Another problem is there is no dedicated center channel speaker to match the LaScallas. This would most likely would cause the center speaker too not blend in and always be localized. The woofer problem is easy. Almost all RELs from the original company from the Richard E Lord days will have 2 dedicated inputs that allow high level and low level connections, each with dedicated vol controls. So you can use the bass management in your avr for HT and the ReL crossover, high level for 2ch. Not sure if the new ReL company run by John Hunter will do that. I have been selling 2ch and HT for 30 plus years so I hope this helps you. I use this set up in my own home and it works flawless.
HT and 2 channel in same room? 1 or 2 systems?
Hi all, I wasn't exactly sure where to post this but hoping someone here may have some advice for me. This dilemma has been stressing me a bit so would appreciate any advice. I'll try to make this as concise as possible.
I have recently put together a multichannel system as do a lot of movies/PS5. System is Onkyo RZ50 AVR, Klipsch RF7-iii, RC-64iii and RP-600 for surround. I plan on adding in ATMOS speakers and some big DIY subs soon.
I have always wanted to get into 2 channel audio also. I have a fairly big room, 21x28, so I have also purchased a 5 year old pair of La Scala II's a few weeks ago and I just had a Willsenton R300 tube integrated amp delivereda day or two ago.
I thought at first I would have 2 separate systems in the same space. I started doing some research into how to add a sub to that tube amp and found out I can do this via high level inputs, however, for every 1 discussion that seems to like that idea, I find another discussion or two that says you really need RCA out/bass management to make everything fit together.
So..my dilemma is do I push forward with 2 separate systems? I'll have to find a way to fit another pair of subs for the 2 channel system via high level. But this way I'll be able to enjoy the La Scala's via tube (thru Bluesound Node streamer) which I have been really looking forward to and then have a whole separate HT for gaming/movies.
But.....more than a few people have suggested this might be way over-thinking and over-complicating this and that I should just listen to music thought my multi-channel setup and forget the 2 separate systems. If I did this, I guess I would just sell the RF7's and just listen to everything through the La Scalas. And then I'd only need 2 subs, which would be a plus but then also kind of lose the dream of having a tube setup for music. However, I have more often than not done upgrades and not heard any difference so I'm kind of expecting this with the tubes, too. I have alot of hard surfaces in this room, which I'm working on rectifying, but I am def worried that if I hook up this tube amp, its not going to sound any different to me than going via Pure Audio/Direct thru the AVR.
So plusses to keeping separate, I get to listen to tubes. Plusses to going down to 1 system, I can consolidate and sell extra set of speakers, only need 1 set of subs, get to return the tube amp. I'm just not sure if saying I have tubes is worth that or not.
Appreciate any advice anyone may have on this situation.