HT and 2 channel in same room? 1 or 2 systems?


Hi all, I wasn't exactly sure where to post this but hoping someone here may have some advice for me.  This dilemma has been stressing me a bit so would appreciate any advice.  I'll try to make this as concise as possible.

I have recently put together a multichannel system as do a lot of movies/PS5.  System is Onkyo RZ50 AVR, Klipsch RF7-iii, RC-64iii and RP-600 for surround.  I plan on adding in ATMOS speakers and some big DIY subs soon.

I have always wanted to get into 2 channel audio also.  I have a fairly big room, 21x28, so I have also purchased a 5 year old pair of La Scala II's a few weeks ago and I just had a Willsenton R300 tube integrated amp delivereda day or two ago.

I thought at first I would have 2 separate systems in the same space.  I started doing some research into how to add a sub to that tube amp and found out I can do this via high level inputs, however, for every 1 discussion that seems to like that idea, I find another discussion or two that says you really need RCA out/bass management to make everything fit together.

So..my dilemma is do I push forward with 2 separate systems?  I'll have to find a way to fit another pair of subs for the 2 channel system via high level.  But this way I'll be able to enjoy the La Scala's via tube (thru Bluesound Node streamer) which I have been really looking forward to and then have a whole separate HT for gaming/movies.

But.....more than a few people have suggested this might be way over-thinking and over-complicating this and that I should just listen to music thought my multi-channel setup and forget the 2 separate systems.  If I did this, I guess I would just sell the RF7's and just listen to everything through the La Scalas.  And then I'd only need 2 subs, which would be a plus but then also kind of lose the dream of having a tube setup for music.  However, I have more often than not done upgrades and not heard any difference so I'm kind of expecting this with the tubes, too.  I have alot of hard surfaces in this room, which I'm working on rectifying, but I am def worried that if I hook up this tube amp, its not going to sound any different to me than going via Pure Audio/Direct thru the AVR.

So plusses to keeping separate, I get to listen to tubes.  Plusses to going down to 1 system, I can consolidate and sell extra set of speakers, only need 1 set of subs, get to return the tube amp.  I'm just not sure if saying I have tubes is worth that or not.

Appreciate any advice anyone may have on this situation.

128x128johns21

Showing 1 response by holmz

 

I have a multi and 2 channel system in my room.

It’s very easy if you have a 2 channel preamp or integrated with HT pass-through.

As @bkeske ^says^…

I picked up a used two channel preamp that has a pass through for the HT side.
I also picked a used HT AVP that is powering (currently) a 5.x system, which will ike morph to a 5.4.2 or 5.4.4.

The best place (In the room) for 2 channel is not where the TV is, so a TV lift system was acquired to put the TV out if site during the day and for 2-channel.

It all takes some planning and the layout of the room is multi purpose so that also is majorly WAF driven.

The surround speakers are the same brand as the two channel and I use the AVP to balance them with PEQ. So one may, or may not, want to mix-n-match…
(I sort of needed to keep em the same.)