I almost forgot another obvious option (I was thinking strictly in terms of HP options via your sound card), you can use a USB to SPDIF converter like the Musical Fidelity V-Link or the M2TECH hiFace. Sorry about this lapse in mental facilities.
HP Pavilion dv6700 and Cambridge Audio 840c
I've searched for an answer to this but couldn't find anything.
I'm completely new to computer audio. I'm thinking about trying to connect my HP Pavilion dv6700 to my Cambridge Audio 840c through the digital input. The idea is to stream digital to the 840c dacs, then out through the amp.
Has anybody done this? I'm pretty sure that my computer has a means to do this. If I go into 'sounds' window, I see a "high definition digital device (spdif)" listed as working. From what I can tell, there is some kind of optical digital output in one of the headphone jacks. Do I just get a cable that has an rca jack on one end and a toslink on the other?
Any help would be appreciated here. I know nothing about all of this. I intend to just start by listening to Spotify through the sound system.
I'm completely new to computer audio. I'm thinking about trying to connect my HP Pavilion dv6700 to my Cambridge Audio 840c through the digital input. The idea is to stream digital to the 840c dacs, then out through the amp.
Has anybody done this? I'm pretty sure that my computer has a means to do this. If I go into 'sounds' window, I see a "high definition digital device (spdif)" listed as working. From what I can tell, there is some kind of optical digital output in one of the headphone jacks. Do I just get a cable that has an rca jack on one end and a toslink on the other?
Any help would be appreciated here. I know nothing about all of this. I intend to just start by listening to Spotify through the sound system.
- ...
- 6 posts total
Michael, I think you're right! Now you have 3 options! If memory serves me right, HP output SPIDF via a headphone jack on a couple of their entertainment laptops a few years back. If your soundcard/properties gives this option, then it must be so. You'll need one of two adaptors: 3.5mm to toslink or 3.5mm mono to single RCA; or a 3.5mm to toslink cable. If you want a low cost solution, one of these is the way to go. If you want the highest quality sound and the most sturdy and reliable solution then a good quality USB to SPIDF converter is the way to go. FYI The expansion port should be on the left side of your laptop next to the monitor out (it's a wide multi-pin connector). It should also show up as an option in your soundcard. |
Eleet, Thank you so much. You have been a tremendous help. It's amazing how hard it is to find out information on this laptop and its sound capabilities. Starting with the help on the computer itself to multiple searches on the Web (and hours of time) I could find hardly anything, even on the HP support site. I will try to 3.5 cables you suggest first. If the sound quality is not satisfactory, then I will go to the USB to SPDIF route. According to my reading, asynchronous is the way to go! Thanks again. |
- 6 posts total