2. cables
  3. 134949-71291

How to re-terminate Valhalla

Hi there. This is my first posting in this forum. I have a pair of 26” RCA terminated Nordost Valhalla IC’s which I would like to re-terminate to XLR. I am planning to do this myself. I like to tinker and am pretty good with a soldering iron.  I have removed the RCA sleeves and studied the connections=4 red wires to hot center pin and 4 clear wires to negative pin. The outer shield, far as I can tell, is not connected. My questions is, when I solder to the new XLR connectors, do I solder the 4 red wires to pin 2 (hot) and the 4 clear wires to pin 3 (neutral)? And what do I do with the outer shield? Do I bundle it and wire to pin 1 (ground) or leave it floating? And if I connect ground do I do both ends or just the output end? Thanks in advance for your help. 
angelinareef

Showing 1 response by akg_ca

akg_ca's avatar
akg_ca
2,381 posts
 
VALHALLAS are premium cables with a classic FMV on resale or trade.

I would only have NORDOST reterminate them if you want to retain their value . Otherwise you won’t likely be able to ever sell them as OEM VALHALLAS again because of a non-factory DIY job.

(1) Nordost policy:.
Yes, factory re-termination is available. This is best done through our worldwide network of Authorized Nordost Dealers who can arrange the return of the cables to our factory for re-termination.

Well worth the investment ....cheap cost of insurance to do it "right".

More to discover