How To Improve B&W N802 Bass Response?


I’m not satisfied with the bass response of my current system in stereo. It seems weak and doesn’t seem to fill the room at low to mid volume. I’m looking for any ideas or suggestions on improving the bass response. My application is mainly 50/50 stereo music / multi-channel HT. Listening room dimension is 24’(W) x 17’(D) x 20’(H) with openings to living room, foyer, kitchen and sun room.

System configuration:
• Digital sources: Sony DVP-NS 755 DVD Player and Scientific Atlanta 8300HD Cable Box
• Digital-Analogue Converter: Apogee Mini DAC (1 week away from being replaced by Apogee Rosetta 200 DAC and Big Ben Clock Regenerator)
• Preamp: McIntosh C200
• Amps: 2 x McIntosh 501 monoblocks
• Speakers: B&W N802
• Cables: Mogami balanced XLR interconnects (soon to be replaced with Apogee Wyde Eye for all interconnects), Cobalt copper speaker cables bi-wired to N802s.
• Receiver: Denon 5803 (for HT only passing thru C200)

I had tried a few configurations along the way, though I’m not satisfied yet, they may be interesting tips for some of you with similar components:
• Canare L-4E6S Star Quad balanced XLR cables tend to “filter” out mid and high frequencies to a point that the sound becomes muddy.
• Belden 1800F XLR balanced cables are better than Canare where they are clearer and seem to give the illusion of sound stage opening.
• Mogami XLR balanced cables better than the above in my system. They are very transparent, clearer and sound stage opens up tremendously.
• Setting the output trim to +12 on C200 makes a lot of difference. It drastically improves details and sound stage even further.
• Connecting N802 low frequency taps to 8ohm and mid/high freq to 4ohm taps of MC502 helps. The bass response seems to be louder and the mid/high seems to be “sweeter” and just right.

I shall soon see what kind of performance improvements from the Apogee XLR cables, Rosetta 200 and Big Ben.

I’m also considering getting a good sub to extend the lower frequency. In my initial research, the SVS PB12 Ultra/2 ($2300) sub seems interesting. It has 1000W BASH digital amp and 2 x 12” TC Sound Ultra drivers. Anybody has any opinion about this sub for music application? I’m wondering how well it blends in with the N802s. I’m not sure how good the 1000W BASH amp is compared to McIntosh MC501 monoblocks. Would I be better off getting passive sub and let the 501’s drive it?

As an alternative to sub, would a 2-channel equalizer help boost the low frequencies of N802s to make frequency spectrum “flatter” at a given db? I hate to waste my investment on N802s, I mean the spec says it can go down to 30Hz. My reservation of EQ is it stretches out my signal path (dtx EQ has AD and AD built-in, in addition to my Apogee DA in the signal path). Not sure if this latency will lead to video syncing problem for HT application. Also, I don’t want to find myself having tinker with EQ’s instead of enjoying the music. If you have good experience with EQ, please share your experience about the brand(s) you tried.

I will appreciate any suggestions you may have on improving the bass response.

Thanks,
John
jteoh1
These speakers do not require a ton of power just a decent amount of power. I should know as I own a pair, do you own a pair? B&W speakers have always sounded Liquid and dynamic as well as highly resolving. Krell, ARC, Bryston, among others are all very fine products which I have personally owned and used in the past. Judy426, I now after reading your last reply see how much you seem to put down excellent companies that have had a lot to do with advancing the state of the art in each of their respected catagories. Krell, ARC, and B&W each have done a lot in the years they were making products to making our music sounding better and better. Judy, I really don't know why you have such a dislike of these very fine companies but you style of writing idicates to me that you have the mind of a child and one who needs to grow up a little to learn how to be nice to other people and not go bashing other companies when you can't really prove anything. I will still try to explain to you in laymans language about power amps and why amps with a little more power are better.
High-powered amplifiers do have their place in good sound. You may have an efficient speaker, but for some reason the speaker always sounds better when it has more power---even when you don't use all that power. People don't realize they may only be using an average of five or ten watts, but all those little clicks on the attack time of the guitar, for instance, may shoot up to 150 watts. It doesn't sound like much, but if you have a 70-watt amplifier there's less of a click and it sounds less open and less natural. With a high-powered amplifier, you have all this reserve power and everything just sounds more natural.
So Judy, lighten up a bit and stop your ARC and B&W bashing because you can't just say that a B&W speaker sounds bad without first asking if it's broken in, what it's hooked up to, and seeing if it's properly set up. This also applies to the speakers you own and your own equipment as well. Remember one thing, most of your high end audio equipment companies products all sound pretty much dry and lifeless until they settle in or break in.
spike'em....pull em out from the walls ....and position them properly...break em in...make sure your source and power is up to par and enjoy!
...and if that doesn't work for your B&Ws try Jetstream’s suggestions with your girlfriend/wife.

Cheers,
Try demoing some Analysis Plus Solo Oval 8 or Silver Oval In interconnects on your system. Or you can approach it via the speaker cable front - the Solo Oval 8 and Big Silver Oval speaker cables seem to work great on bass. The bass is tight, powerful/strong, fast and defined. Give them a try.

An alternative is the Audience AU24 IC or SC. IC would be the cheaper route.

Good luck!