How do you deal with vibration?


Greetings all,

Many of us work very hard to keep vibration out of our equipment. I was hoping we could share our experiences with each other. I was wondering what other DIY methods people are using?

I personally have had good luck with shipping open cell foam under plywood. I find that about 60-70 percent compression works best. I place the foam underneath some plywood (Using spruce 3/4 inch). Then I place the component on the plywood. However, I think this more isolates the component from outside vibration. I don't think it does much to drain internal vibrations, especially in a CD transport.

Also I can not find open cell foam in town any more. I am ashamed to say that I actually went to Wal-mart to buy some. Now they don't carry it any more. So I was wondering where else I can get some?

I am currently thinking about building a Sandbox for my CD player and amp. Then putting the sand box on top of some sort of isolation material (open cell foam or cork rubber etc.) My thoughts are the foam or cork or etc should help keep the vibrations from getting into the equipment and the box should drain the internal vibrations.

Also, what are peoples experience with different woods. I live in BC so I can get most wood fairly cheap. I imagine every wood has it's own sonic signature due to it's resonant frequency. What works best? Solid maple, birch ply, MDF, walnut, mahogany etc...?\

Anyways, feel free to through ideas and experience (both good and bad) out there. It would be good to know what works and what doesn't.

Happy tweaking,
Nick
nickway

Showing 8 responses by tbg

Pbb, do you know what happens if you move a wire in a magnetic field? You get current flow. Your components are full of wires with magnetic fields around them caused by their having current flows. If you vibrate them with sound waves, you generate non-music current flows. Also ac transformers with varying demands for current sing themselves and vibrate the unit. Your sound would be much better were you able to remove all vibration.
Pbb and Eldarford, both of you are dismissing the effect of vibration induced non-music. Eldarford goes further to suggest that it is inaudible. I have no concern whether you think it is inaudible. Nevertheless, at some level it is real and an explanation for why vibration control can influence what we hear.
Jadem6, I agree. You may notice that I am largely dismissive of those who say vibration control cannot help. If they believe that, it is fine with me, but if someone asks, I have many suggestions. I cannot understand why they care to try to convince me that they are right despite my hearing they are wrong. They often say that I am delusional but they cannot prove it and I don't think they are right. Enjoy.
Pbb, don't assume that others have your ears or the resolution of your system or your biases.

Eldartford, my conclusion, as always were instruments are involved, is that they don't have the resolution of human ears. I do admire, however, your efforts to instrument tests.
Is it real or is it imagination? This is a reoccurring concern throughout Audiogon and Audio Asylum. Two additional factors seem always to also weigh into this dispute, namely is there a theory and can it be measured. Above and beyond this are two additional considerations-is there a cheap alternative to more expensive technologies and products and must benefits be proven to others to use them yourself.

The two paths of logic are as follows. First, without a theory to account for an observation, especially if the product is expensive, and if there are no measurable differences, it is imagination. Second, if there is an observed benefit, if you can afford it, buy it as it is real. The words, "scientific" and "sham" are words introduced into the first logic. The proponents of the second logic, if pushed, suggest that often science advances based on observations that defy old science theory, such as the impact of the X-ray discovery, etc. Man's scientific theories have often proven incorrect and often capture only a portion of what happens around us. They also suggest that they do not need protection by others from scams.

It is quite clear that neither of these logics can prove the other wrong. Much space has already been devoted to this useless enterprise, but I guess since we continue to participate, we must enjoy these crusades.

The original post here concerned how do people deal with vibration, not whether it is meaningful to do so. Perhaps we should answer that question.

For the last 20 years, I have devoted much time and money to controlling vibration. I started with marble shelves suspended on innertubes and racket or tennis balls with slits. Later I bought the first TipToes and ultimately got Valid Points, which in my experience are the best of this idea, although the Goldmund points are also quite good. I tried many stands and shelves and still have many Mana stands, which are basically spikes pointed up and down. Until the Acapella shelves, I consistently found the Neuance shelves the best, at least in my system.

About five or six years ago I got the first Aurios. I found them a real pain as the shelf had to be quite level to get the real benefit. Also heavy powercords and interconnects made their use a nightmare. I also tried the RollerBlocks and their Grade 3 balls. These and later Aurios, I always found, could not perform at the level of the original 1.0 Aurios, especially when used with tungsten carbide balls on top. On the Neuance stands, I never found feet to add anything to the quality of the sound.

Then I discovered Shun Mook pucks on top. These give a very subtle benefits in realism that cannot be otherwise achieved. I have tried ebony pucks as well as other pieces of wood.

I should also say that all along Goldmund has been advocating two soft feet and one grounding hard foot. Under their cd transport this clearly worked, especially with their quite heavy stand. Even with my Acapella shelves on Mana stands and using the Acapella feet, I do not get the purity of sound that I once got with the Goldmund transport.

I suspect that ultimately everyone will agree with me that this is a quest that is never achieved. I have been up many deadends but generally have advanced, often at substantial expense. All I can suggest is to try new devices but be prepared to conclude now or later that they are no benefit.
Mdp0430, in my string of stuff I have tried, I neglected to include granite. Yes, I have tried it under amps as well as under the Mana stands. Its greatest strength is its mass, which is hard to vibrate at low frequencies, but it does ring. Ultimately I had a Sound Anchor stand with a steel bottom sand box on top and then the 2 inch thick granite tomestone under the amp. This all preceeded my getting Mana stands and these proved not only easier to live with and more effective.

I did get bass with great punch and quieter overall sound with the granite on sand combo, but the Manas yielded almost as good bass but much better dynamics in the music. I should say that at about the same time I switched from solid state amps to single ended triode tube amps used with efficient horns.

I did try to get the best of both worlds by putting the granite under the Mana stands. This did liittle but going to multiple Mana stands in a pile, what they call levels two, three, etc., gave clearly better results.

I think the thickness of the granite is very important. Mine was only 2 inches thick. I once tried one on top the other and that was better. I was tempted to try it but never went to three layers. As you can see, I am inclined to excess.

All that I can really say is that mass is one important element in vibration control. I doubt if anything would be better than 8 inch granite under all your equipment, assuming that your floor would support it.
Stehno, almost all posts here and on AA end up with the same division between those who hear benefits and those who either say it is illogical that it makes a difference or that measurements don't lie and show no difference. If you hear a difference unless you like to argue like me, just ignore the din of doubters. If you don't hear a difference, also enjoy in peace.
Rsbeck and Eldartford, I am a social scientist with many published research reports. I firmly believe in test hypotheses with data. I know full-well that the mind can be fooled. I do not believe, however, that science can settle the issues of whether there are differences between amp, cables, with and without isolation, or whether the IC works. I feel no need to prove what I hear nor do I think the rigor or research designs in tests I have seen and even participated in allows conclusions that some might want to make. I merely report my observations, which are the basis of inductive theory development. When I have my science hat on, I want data to assess the hypothesis, but here all I want to know is whether my sound improves.

I am certainly not discouraging others from reaching other conclusions, but I very much resent notions that I am merely deluding myself. When others share my impressions, I feel more secure in my impressions. Guys this is a hobby not competitive football or finding a cure to cancer.