2. cables
  3. 1335297906

High Fidelity Cables CT-1designed by Rick Schultz

In December 2011,I wrote that High Fidelity cables led by cable designer Rick Schultz was putting together a new cable.The cable came to market as CT-1.The CT-1 has FINALLY made it into my system!I had obtained a version of the prototype that Rick had been working on.It blew my previous reference Genesis by Virtual Dynamics.I thought I had finally found my end with this cable.This prototype delivered to my ears "Nirvana".Could I be at the end of my quest for the ultimate sound?
No. I received two pairs of CT-1 to replace my prototypes.They went into the system this past Friday.Unable to dedicate time until Sunday listening,I stole a few moments,ducking away from company with anticipation.My guest could tell even with the music set for"ambiance"something was intriguing and I was in for a treat!
The experience:
First off,CT-1 was very user friendly.Installation was simple;the cable is very nice and light.The female RCA fit beautifully unlike any I had found in other cable.It was secure and reliable.It seemed much thought was dedicated to developing a designer fit to an aesthetically stunning RCA connector.Install entailed a few wiggles to ensure what seemed like a compression fit on my RCA.
It was 2-3 hrs. for the 1st step of break in to be complete.At that point I had something different!Today,although they only have 10-12 hrs. on them,I can`t put into words how much my system has transformed.Believe me,I loved my prototypes.However....there is simply no comparision.
The clarity and sound is so natural.
The soundstage is like nothing I ever heard.Resoulution is breathtaking and inner detail is simply hard to believe possible.
The sound has transended and now it simply does not seem as thought I have speakers.
My system is musicians playing music.
I am told with time they will improve and I trust that as it was revealed with the prototypes.I wanted to share my thoughts with you that now.
Unequivocally,a testament to High Fidelity,as the name declares.
High Fidelity Cables for me,the last word on it,after 12 hours!
Truly Amazing

Al
alpass

Showing 9 responses by nic10pin

nic10pin
10 posts
 
Hi folks - have been so impressed with all your positive comments that I have now got CT-1 and 1e RCAs on home demo.
Now I can hear what all the vibe has been about....wonderful music!

Does anyone happen to know if Rick can do shorter lengths than 1m without affecting the technology?
Ideally would be looking for 0.6m lengths.

Thanks, nick
nic10pin
10 posts
 
Thank you all for your advice. My dealer has at last heard back from RS and apparently 1m is the min length.
Cheers nick
nic10pin
10 posts
 
Hi everyone, me again with yet another question.....
currently have CT-1E speaker cables on demo, but don't know what are the best supports for the WGs which are on the floor - thick carpet/wood/brick/ceramic?
Any suggestions much appreciated.....just loving my music now :-)))
Nick (over the pond in UK)
nic10pin
10 posts
 
Tbg...
Many thanks for your advice - will search out some glazed ceramic from my garage then.
Will also email Rick as you suggest.
BR: Nick
nic10pin
10 posts
 
tbg..have had a very interesting response from Rick re Wave Guides on carpets, so have asked his permission to quote him on here, as I am not sure if it would be correct to do so without asking.
As far as the isolation side goes, he is of the same mind as both you and Ddraudt, in that experimentation with different materials is key.
Such fun!
nic10pin
10 posts
 
Ddraudt..thank you for all your thoughts, v.interesting!
Rick is of the same mind as you, in that experimentation is key, as well as being fun.
Birch ply hmm? Will have to keep an eye out for some of that then. :-]
nic10pin
10 posts
 
tbg..Ricks response re wave guides, etc, on carpets...

Nick the issue is static energy - it can and does hold a bond on the signal in the cable itself. The more dry the climate the greater the issue.
I recommend the use of Static Guard spray on the carpet under your cables. The spray will block electric bonds between the cable and the carpet itself. I would apply rather liberally and even wipe or rub over the carpet after spraying to allow a good penetration and bond with the carpet. It may/will have to be repeated every few weeks or months..

This should take care of most all of the issues associated with the floor and its static charge and can and should be done under all audio equipment and cables. The issue is not really a small one so you will hear a pretty good effect.

Rick did say that this is already in his Oddiphile episodes on YouTube, but was fine with me posting it here as well.

Nick.
nic10pin
10 posts
 
Ddraudt..Dave, certainly am loving hearing my music now, even though only have a 1e loom at present (hoping to move up to 1u in due course), so can well understand your feelings re completing your 1ur loom - I'm so envious...but happy for you at the same time!
Happy listenings to all us HFC users!
Nick.
nic10pin
10 posts
 
@ddraudt: Dave, thanks for the mention of Baltic Birch - have just replaced my laminated glass shelves with some 18mm ply of genuine Russian origin - great result!
Currently demo-ing some U spk cables, and awaiting arrival of U i/c's - big smiles!!
Enjoy the music, Nick.
More to discover