It sounds like many are obtaining good results with the MC-0.5's. It's one of those tweaks I have a difficult time believing in but I'm just going to have to give them a try. My question is will getting just one be worthwhile or should I wait until I can get more. I don't have any magnets in my system now but my CT-1 IC's arrive tomorrow. I have two dedicated 20 amp circuits with 10g romex and PS Audio Power Ports ( SR Black duplexes coming soon) into my listening room but I'm currently only using one of the circuits. I'm using a PS Audio P300 and WyWires Powerbroker so I have extra plugs to utilize. Any advice on MC-0.5 use would be appreciated.......unless it's from Ozzy, 16 MC-0.5's???!!!! Are you kidding me? Lol. Just kidding Ozzy, love your passion!
High Fidelity Cables CT-1designed by Rick Schultz
In December 2011,I wrote that High Fidelity cables led by cable designer Rick Schultz was putting together a new cable.The cable came to market as CT-1.The CT-1 has FINALLY made it into my system!I had obtained a version of the prototype that Rick had been working on.It blew my previous reference Genesis by Virtual Dynamics.I thought I had finally found my end with this cable.This prototype delivered to my ears "Nirvana".Could I be at the end of my quest for the ultimate sound?
No. I received two pairs of CT-1 to replace my prototypes.They went into the system this past Friday.Unable to dedicate time until Sunday listening,I stole a few moments,ducking away from company with anticipation.My guest could tell even with the music set for"ambiance"something was intriguing and I was in for a treat!
The experience:
First off,CT-1 was very user friendly.Installation was simple;the cable is very nice and light.The female RCA fit beautifully unlike any I had found in other cable.It was secure and reliable.It seemed much thought was dedicated to developing a designer fit to an aesthetically stunning RCA connector.Install entailed a few wiggles to ensure what seemed like a compression fit on my RCA.
It was 2-3 hrs. for the 1st step of break in to be complete.At that point I had something different!Today,although they only have 10-12 hrs. on them,I can`t put into words how much my system has transformed.Believe me,I loved my prototypes.However....there is simply no comparision.
The clarity and sound is so natural.
The soundstage is like nothing I ever heard.Resoulution is breathtaking and inner detail is simply hard to believe possible.
The sound has transended and now it simply does not seem as thought I have speakers.
My system is musicians playing music.
I am told with time they will improve and I trust that as it was revealed with the prototypes.I wanted to share my thoughts with you that now.
Unequivocally,a testament to High Fidelity,as the name declares.
High Fidelity Cables for me,the last word on it,after 12 hours!
Truly Amazing
Al
No. I received two pairs of CT-1 to replace my prototypes.They went into the system this past Friday.Unable to dedicate time until Sunday listening,I stole a few moments,ducking away from company with anticipation.My guest could tell even with the music set for"ambiance"something was intriguing and I was in for a treat!
The experience:
First off,CT-1 was very user friendly.Installation was simple;the cable is very nice and light.The female RCA fit beautifully unlike any I had found in other cable.It was secure and reliable.It seemed much thought was dedicated to developing a designer fit to an aesthetically stunning RCA connector.Install entailed a few wiggles to ensure what seemed like a compression fit on my RCA.
It was 2-3 hrs. for the 1st step of break in to be complete.At that point I had something different!Today,although they only have 10-12 hrs. on them,I can`t put into words how much my system has transformed.Believe me,I loved my prototypes.However....there is simply no comparision.
The clarity and sound is so natural.
The soundstage is like nothing I ever heard.Resoulution is breathtaking and inner detail is simply hard to believe possible.
The sound has transended and now it simply does not seem as thought I have speakers.
My system is musicians playing music.
I am told with time they will improve and I trust that as it was revealed with the prototypes.I wanted to share my thoughts with you that now.
Unequivocally,a testament to High Fidelity,as the name declares.
High Fidelity Cables for me,the last word on it,after 12 hours!
Truly Amazing
Al
Showing 12 responses by mac48025
knghifi, you ran a separate ground just from your conditioner or for the entire dedicated circuits? When I asked my electrician to run a seperate ground for my dedicated lines he said it would be a waste of time since it would end up sharing the ground with the rest of the electrical service anyways. I’m no electrician so I have no idea. Would I disconnect the ground from my dedicated lines at the electrical service and run a new ground to an independent ground rod on the other side of the house from the ground rod for my main electrical system? Might be a question for almarg. I’ll check out the Furutech stuff. Thanks |
Thanks knghifi......I apologize for my ignorance but what is the WBF forum. Thanks Pete. 28? Yikes. I was thinking two would suffice. Usually if one is good, two is better. In audio there is no limit to better! Guess that's what makes it so much fun. I think I'll start with two and experiment with placement. |
My CT-1 IC update after three days. Thankfully I knew it was going to take some time for these IC's to establish their magnetic effect as they were rather pedestrian the first two days. Not bad, but certainly no better than the Cerious GE IC's they replaced. Well, that really changed starting last night. I was only half listening as I was playing the Cowboy Junkies. I love how this cd is miked and recorded and the CT-1 was revealing everything in its full glory. The cymbals sounded more natural with longer decay than ever, that's what initially caught my attention. I started really listening and was struck by how natural Margo's voice sounded. The guitars seemed to be in the room. A blacker background allowed more details to emerge. While imaging isn't super important to me I was enjoying the separation of the musicians in a way I had not heard before. At the end of the cd when the performers put their instruments down and are talking I was able to discern words and background sounds much more clearly than ever. I doubt that the cables have inserted their full effect into my system yet but they are already something special. Thanks to all those that advocated a High Fidelity IC/ Cerious GE SC combination......its stellar. Lastly, the Cerious GE IC's are very good but in conjunction with the GE speake cables are a bit too laid back for my liking. The CT-1's add some sparkle and detail without any harsh artifacts. |
Question for MC-0.5 users. As I mentioned I have four on order. I'm using a WyWire PowerBroker that my components are plugged into which has two open outlets. I also have an open outlet on the dedicated 20 amp circuit for my audio system. I'm a better off having the four MC's connected to the dedicated outlet plug or into the PowerBroker? Or two in each? Thanks for your help. |
Thanks Pete, that makes good sense. 21 on one line? I thought it was a typo until seeing further up that you're using 48. Ok.....that's certifiable.....and I love it! :) It sure makes my four seem very reasonable now. I can tell the wife that I only have four when some are using 48! Truth be told, she won't ever notice I have four.....or more for that matter. So any kind of power strip or splitter will work? |
Thanks lak. The PowerBroker is just a power distribution center utilizing audiophile grade components in a wood case built by Daedelus speakers. No power conditioning, magnetizing or re-generation of any type. I purchased it initially for my home theater system to plug everything into and it actually improved both the audio and video. Believe it or not, I don't know how to post links.....yeah I'm old! www.wywires.com. Go to products then to power distribution if you're interested but there's not much more info than what I mentioned. It's just an over priced power outlet center.....but she sure is Purdy :) Thanks for your help. |
Thanks Pete. I have an old PS Audio distributor with 6 outlets that I can use for now. It's just outlets, no conditioning or regeneration. I'll plug all four MC-0.5's into that and plug the PS Audio into the wall outlet. Good idea with your rack and buying b-stock units. I took advantage of their current sale.....doubt I'll ever catch up to you though! I should have them next week and I'll pass my results along. |