Herron VTPH2 questions?


I have an Herron VTPH2 and I am thinking of getting a Grado VPI The Reference MM cartridge which has only 1.2 mv output. I wonder if I can use the mm input with it?
luna

Showing 2 responses by almarg

Are you presently using a MM cartridge that provides a higher output? If so, let us know its output rating, and give us some idea of the highest position at which you normally set your volume control. For example, if it is a rotary control its minimum position may be 7 o'clock; its maximum position may be 5 o'clock, and the highest position you normally set it to when playing records may be 12 o'clock.

Then, with no music playing, try to determine how much further you can turn up the volume control (e.g., what clock position you can turn it to) before hiss levels become objectionable, or you reach the maximum possible setting (whichever occurs first).

You should certainly talk to Keith, but providing us (and perhaps him) with that information may also be helpful (if, as I say, you are presently using a higher output MM).

Regards,
-- Al
I am using Clear Audio Aurum Beta which is 2.5mv output and my volume is on 9'oclock. If grado's out put is 1.5mv. Does it mean I have to move the volume up around 12 o'clock?
My guess would be more like 10:30 or 11 o'clock. The difference between 2.5 and 1.5 mv is only about 4.4 db. There may or may not be an additional 3 db of difference because different test standards exist, as discussed in this thread.

I believe that volume control rotation from 9 to 12 o'clock typically corresponds to a volume change in the area of roughly 12 to 14 db or so.

Regards,
-- Al