2. tech-talk
  3. 1001889380

Here's How I Make My Equipment Racks

In response to a previous thread, here's how I make my
equipment racks:
List of equipment: 3/4" thick MDF cut to desired shelf
size
(4) 3/4" diameter 6' threaded steel rods
3/4" nuts and washers (8 per shelf)
Drill a 3/4" hole in the corner of each shelf in exactly the
same place. I do this by scribing a line with a square 1 1/2" inch in and using a nail set to punch a hole where the lines intersect. A drill press works great to drill the holes so they are all straight and true. Now that you have
a hole drilled in each corner of each shelf, simply screw
the whole thing together, adjusting each shelf to fit your
gear. Use a square to make sure your first shelf is straight, and measure each one likewise. If you do this
correctly, your rack will sit straight and level. If you
need to level it further, buy (4) 3/4 rod connectors, which
are about 3" high, and screw these into the bottom of the
rod and use them to level it. I paint the steel rod using
Krylon Industrial enamel (flat black looks best), and paint
the shelves to match your decor. This makes a very solid,
heavy audio rack. Total cost is about $40 for the steel
rod, $15 for the nuts and washers (about $1.00 a pound)
$20 for the MDF, and $5.00 worth of paint for a total under
$100. I've made several racks this way and have used the
same method to make CD racks.
Dave
Ag insider logo xs@2xdave43
caterham1700
271 posts
 
I understand the concern but the device is actually much more stable and secure than you'd imagine.The spike will be inset from the edges a good 1-3/8" or so and the topsheet of the tables is quite soft.When you place even a moderate load,the spikes dig in pretty firmly and you have to push pretty hard to get any movement and would be dragging the spike tip across the veneer.In a typical Mana phased array, the clearances are closer to 1/2" and the spikes rest on a hard and fairly smooth formica.Unless you do a lot of "entertaining", practice for WWF tag team wrestling matches or train Labrador retrievers in your listening room,I say that the stacked IKEA is pretty secure.Certainly moreso than using rollerblocks or tall unsecured footers,etc under your components.

Best,
Ken
caterham1700
271 posts
 
more addendums-
If you're still worried about slippage/accidents, you can stick self adhesive felt pads(the kind used beneath knick-knacks and furniture) to the tabletops beneath the spikes for a little added security.I suppose you could even glue washers to the table corners with the spikes sitting in the resulting recesses.

Ken
randy7241
2 posts
 
Ken - Thanks for the further thoughts and suggestions!

And have you been peeking in my windows? (smile) I have a black and a yellow labrador retriever!

-Randy
psychicanimal
1,738 posts
 
I bought Phillips head wood screws (#14 x 1 1/2") for my Ikearack. They should work fine with that flared 'bottom'.

Although I am, among other things, a professional grindersman, I just don't see myself grinding equal sized points freehand in my little apartment. I'll get some Michell cones with wood screws for the bottom table...

Thanks again Ken for sharing your knowledge.
subaruguru
1,375 posts
 
Ken,
No wonder you're running 4 weeks out! Get off the thread and get back to work--my check's enroute!
;>) Ern
More to discover