Imaging and pinpoint accuracy are more influenced by speaker positioning and room setup/interaction. You need to spend some serious time in experimenting with the placement of your speakers and with mitigating early reflections, etc...
-RW-
-RW-
Help: WPC for my speakers
I will try to keep this short. New to the hobby and already have upgraded speakers. I now have system audio 10s. They are 88 db and have 8-4 impedance. Min power 50 watts Max 135 watts.
Currently powered by 50 watt exposure super XV. I got the bigger sound, much better clarity and much better tone accuracy with the upgrade. What I lost was the pin point accuracy/ tight bass that my smaller system audios had. I believe this is do to the lack of power I have using the exposure.
Do you all think more power will solve these problems? Second I am looking at a DK design vs1 mkll by LSA group used. This amp would be 160 wpc at 8 ohms and 320 wpc 4 ohm. Will I have to be very carefull about over powering these speaker or should I be ok with this power
Currently powered by 50 watt exposure super XV. I got the bigger sound, much better clarity and much better tone accuracy with the upgrade. What I lost was the pin point accuracy/ tight bass that my smaller system audios had. I believe this is do to the lack of power I have using the exposure.
Do you all think more power will solve these problems? Second I am looking at a DK design vs1 mkll by LSA group used. This amp would be 160 wpc at 8 ohms and 320 wpc 4 ohm. Will I have to be very carefull about over powering these speaker or should I be ok with this power