2. speakers
  3. 1152549589

Help with Apogee Diva Crossover

Hi,

I have a DAX 1 for my Divas. I need to modify the passive crossovers for installation. To do this, I need midrange coils (designated a L5 in the owners manual. Can anyone help me by providing the specs for these coils and perhaps a source for purchase. Any help will be appreciated.

Mike
madhf

Showing 3 responses by madhf

madhf OP
170 posts
 
Hi,

Thank you for your replies, cjfrbw and Gallant Diva. For Gallant Diva: The manual can be downloaded from the Apogee Users Website if you go to the active crossover tab. It looks like I need only 1 of these coils per side, and it's for the midrange. Thank you for the spec on that. Very much appreciated. Happy listening!!

Mike
madhf OP
170 posts
 
Gallant Diva:

Thanx again for the additional info. I am just planning on wiring the woofer up as shown in Fig 2. It will be a cleaner job imo. I'll love to hear the difference when I install the DAX. I'll keep you posted>

Mike
madhf OP
170 posts
 
Hi again GD,

My shop technician researched the Alpha Core inductors and the 200uF caps and can get them. He did think that the 0.05mH coil was awfully small. If that's the right value, he will order the largest one (12 gage wire). Since you appear to have the experience with the DAX 1, I'll go with your input. Is the tech on the right track? Also, your opinion on Divas with passive xovers vs the DAX 1? The teck will make the mods so that returning the passive xovers to orig config will involve minimum work.

Mike
More to discover