2. digital
  3. 183324-179891

Help needed to sort out an annoying crackling/static issue with streamer

Hi all, I'm experiencing a frustrating problem playing music with my new Musical Fidelity MX-Stream.  

My hi-fi system comprises:

MX-Stream > Innuos PhoenixUSB > Chord M-Scaler > Chord Qutest > Musical Fidelity M6si amp.

In general, it works fine but every 30 seconds or so there's an annoying crackling (static) sound, or sometimes it's fine for a few minutes or more.  Unfortunately, it's not a reproducible issue using the same piece of music, i.e. it occurs randomly.  I've tried a million solutions but here's a summary of what I've tried so far:

1. If the MX-Stream is removed from my hi-fi system, there's no issue.  So it appears to be the main culprit.

2. MX-Stream's firmware is updated to the latest version.

3. I use Roon (on a dedicated ROCK server) along with Qobuz for my music.  Playing the music directly via the MX-Stream iOS app gives the same issue.  Using Airplay instead of Roon/Qobuz also gives the same issue.

4. Replacing all the USB cables, network switch, including a new power conditioner, and replacing all the ethernet cables doesn't help.

5. No such issue when my iPhone or iPad is connected using a USB cable.  This issue only occurs wirelessly.

6. High speed internet (>100 Mb/s).  Problem occurs using either WiFi or ethernet.

7. It's got nothing to do with switching of bitrates/music.

8. Removing other components (e.g. M-Scaler, Qutest, Innuos) from the system doesn't help.

9.  Directly connecting the MX-Stream to my MF amp's internal DAC using a high-end USB cable also shows this issue but it sounds different (not so much of a static sound but almost like a transient loss or warped type of sound, if that makes any sense!).

10. Interestingly, when controlling Roon using an iPhone instead of an iPad, the static sound appears more often.

11.  Altering the buffer size, etc in the MX-Stream (Volumio) app (or Roon app) doesn't seem to help.

12.  Yes, I've tried connecting different sets of speakers.  Same issue.

Thanks for reading this far!  Any advice would be appreciated (also currently waiting on a replacement power supply for the MX-Stream - but I've completely run out of ideas!).  

 

lmr27

Showing 2 responses by kiwiscott

kiwiscott
28 posts
 

Sorry just guessing now - I also remember another forum thread talking about power grounding being a problem. Is everything on the same outlet / loop?

kiwiscott
28 posts
 

It sounds like a buffering issue but it’s difficult to see where. There’s a lot of upscaling and conversions going on in your system. 

If the iPad and iPhone truly make a difference, and you’re not tricking yourself, then there must be app specific settings in those devices (which seems unlikely). 
 

if it were me I’d factory reset everything. Set the output signal of the streamer to CD quality test it out for drops. Then move to the next output quality and test, etc etc.

if it’s a network problem you should see worse signlas as you move higher up the quality path.

if it’s different using local files vs streaming - then suspect  internet somewhere.
 

all in all - step 1 call your dealer or the manufacturer ….. you could just have a lemon. 

IF you still get stuck ….. buy a WiiM mini ($90) and test with that to prove its your device. 
 

More to discover