Help Chiro C-802, volume too small.....


I Bought a used Chiro C-802 with AC3, DTS & Tuner built in. I hooked it to Threshold S/1000, 500 watts mono power amps & ATI 1506 bridged for 3ch/450 watts with Genesis APM1 & 750 speaker system. But C802 produces a very little sound level on all source. Please see the comparison between Mcintosh C-39 & Chiro C-802. Both have digital display scale 1 to 99.

At level 10,
C39, decent, comfortable sound / C802, no sound.

At level 20,
C39, somewhat loud, comfortable sound / C802, no sound.

At level 30,
C39, almost too loud sound / C802, very little sound.

C802 has to be driven to over 80 for good comfortable sound.
I never tried to drive C39 to over 40 cuz it's too loud.

Please help.
ysim
Suggest you go to the source himself as it sounds like there's bad ju-ju going on. Tony's email address is krc2@earthlink.net. Good luck.
Jim,
As I e-mailed you, the unit was received with loose screws that holds power transformer. when I hooked it to my system, it had very low volume out put & dolby processor wasn't working. He agreed to take it back & repair. He said the daughter board next to mother board was loose & everything was working. Now it seems everything is working & volume out put is better than before but still about 1/5 of McIntosh C39 pre amp. I have to drive the volume to over 70 to have a decent sound level on 500 watt power amp. Thanks.
Ysim, I remember your original post about the damaged C802 you received. Did you ever have it serviced? Sounds very similar to the original problem you described a month ago.