2. cables
  3. 1024496183

HELP... 2 yr. old pushed in the dust cover

I tried the vacuum-cleaner suction trick, in 2 or 3 differant iterations, but the suction is inadequate to pull out the center convex dustcover part of the 6" Dynaudio driver. I tried taking the driver out, but the affected part of the driver is not acessable from the back. Thinking of trying duct tape, then carefully removing any adhesive residue with appropriate solvent. I'm hoping someone has an easy fix for this!
tvc15
killerpiglet
374 posts
 
Can you get compressed air behind the driver?

KP
taichiter
2 posts
 
I had that problem a while back. I was able to pull the center out by using a product like BLUE TACK, which is a tacky/sticky clay like substance. I stuck some of the Blue Tack to the dust cover and I was able to reshape the dust cover, by pulling on the Blue Tack; I had to do this process several times. Good Luck.
brianmgrarcom
1,317 posts
 
Try using something less sticky than Duct tape first.
pbb
1,140 posts
 
Scotch Tape works fine. You may want to reduce its tackiness by first applying it to a clean hard surface. Do not attempt to use any solvent to remove the adhesive from the driver. It is better left there as the risk of damaging the driver is always present
More to discover