Thought I would mention my setup, consisting of Moon 600i integrated, Focal L&R Utopia Be loudspeakers, (45Hz-40kHz) and one JL audio e110 subwoofer. Room is about 15x21 and 7.5 ft ceiling.
The Focal speakers are ported with two ports on each one, I have spent much time experimenting with plugging ports. One plugged, vs two plugged, etc. In the end I decided they sound best with both ports open. Also after lots of experimenting I have found using the low pass crossover set (according to the dial) just under 35Hz provides the most accurate sound.
The difference between the listed low frequency response of 45Hz by Focal and using <35Hz crossover setting on the e110 seems like would leave a hole in the sound field, but I have found if I set the e110 closer to the 45Hz of the Focals it only exaggerates the bass frequencies in the maybe 40Hz -60, 80+ Hz range?
I would also suggest look into the Soundoctor setup advice and CD at www.soundoctor.com, can be helpful. It has been a long road but my system is sounding great in all respects!
Gary
The Focal speakers are ported with two ports on each one, I have spent much time experimenting with plugging ports. One plugged, vs two plugged, etc. In the end I decided they sound best with both ports open. Also after lots of experimenting I have found using the low pass crossover set (according to the dial) just under 35Hz provides the most accurate sound.
The difference between the listed low frequency response of 45Hz by Focal and using <35Hz crossover setting on the e110 seems like would leave a hole in the sound field, but I have found if I set the e110 closer to the 45Hz of the Focals it only exaggerates the bass frequencies in the maybe 40Hz -60, 80+ Hz range?
I would also suggest look into the Soundoctor setup advice and CD at www.soundoctor.com, can be helpful. It has been a long road but my system is sounding great in all respects!
Gary