2. speakers
  3. 1105344411

hales transcendence 5 and mcintosh mc 300 advice.

can someone tell me what should be the best connection on my mc 300 with auto formers. 8 ohms or 4 ohms with the hales transcendence 5 speakers, i don't know what the nominal impedance of these speakers i just got them used and can't get that answer. it seems i get more bass when i plug them in 8 ohms but is it the best way or if they are 4 ohms speakers i should connect them to the 4 ohms on the mc 300 since there is that choice, thank you for your help with that.
laurzy1969
3 responses Add your response
tara
26 posts
 
Hello,
When I last talked to tech. support from McIntosh, I wasn't sure what the impedance was on my speakers either. And what the tech guy told me was to hook it up to the lowest ohms available, in this case, 4 ohms. Macs are autoforms any ways, so don't worry about doing any damge to the speakers or not providing enough juice to the speakers. If I'm not mistaken, all Hales are rated at 6 ohms.
Just my 2 cents,
Tim
aball
2,016 posts
 
Actually, you can hook it up to whichever tap you like better. You won't damage anything either way. You are right - the sound does change when going to a different tap. The lowest one available will give you the least distortion (on paper) so that is what they will tell you to use but you don't have to. Try them both and pic the one you like best! Arthur
laurzy1969 OP
2 posts
 
thank you for your help evrybody...
Log in to respond
More to discover
80x80
KEF LS50 Meta
80x80
Spatial Audio M3 Triode Master
80x80
KEF Blade 2