2. tech-talk
  3. 1339554497

Ground Loop in HT system???...HELP

I have a reoccuring hum coming thru my amp and cd player about every 5 to 7 seconds.
My equipment is McIntosh mc205 and mx136,Naim Audio CDX,Oppo 93,Furman Elite 20PFi,time warner cable box and Pioneer Elite Pro 110fd plasma tv. All on a dedicated 20 amp line.
I've narrowed it down to the tv. When the picture's on the hum is there, when tv is off...no hum. It's not the cable box either.
I had luck with an extension cord for the tv-plugged it in across the room...hum is gone. Also used a smaller LCD tv set up with in the HT and no hum. Is it my HDMI inputs on the tv? I'm lost and no one seems to the any answers. Any help would be very much appreciated. Thanks guys
mlopardi
Ag insider logo xs@2x
islandmandan
1,260 posts
 
I may be wrong here, but I suspect it's your cable tv box. How do you know it's not the tv box? Even when it's not turned on, your tv is still hooked to it, continuing the grounding pattern. The only ground loop problem I've ever had involved this box. I had to open up the box, and put a suitable ground lug on it, and then run it to ground.

This completely cured the problem. I would try it, and eliminate your tv box as a source of the problem.

Best of luck, regards,
Dan
Post removed 
mlopardi OP
3 posts
 
Thanks for your response guys. I tried disconnecting the tv/cablebox from the wall and with the picture frozen on the tv I still have an audible hum from the amp and cd player. I'm going to try all of your suggestions. Also thinking about another dedicated line for the tv(crazy???)
Called Furman and the Elite 20PFi is more than enough to handle all the gear. The drama of HT...I will stay in touch
Post removed 
mlopardi OP
3 posts
 
I tried plugging the tv directly into one of the recepts of the quad dedicated 20 amp line and still have the hum...It's got to be something simple but I still have no clue. I'll continue to try...keep the suggestions coming. Thanks guys
More to discover