I am currently using the Shure V15 Type 5 (latest) and it is silent with my Aries/JMW10 arm. This is run into the Rowland Concentra II phono preamp. There is a ground wire on the back of the JMW 10 that if not grounded properly, will result in hum. You may have a bad tonearm lead or clip causing the hum. The Shure if well worn, might have a "bad" styli, but I doubt that is your problem. I would also check how far the tonearm is from any transformer. Two to three feet is needed to not pick up noise. A ground loop may be another possibility to chase down. Any cheater plugs used or dimmers used in the room? Also, unplug any digital and see if that is a problem. Once you try all of these and no cure, try the cartridge on another turntable. Good luck, Jallen
