2. speakers
  3. 1171742598

Free Gallo Reference 3 tweak

The Gallos have received quite a bit of praise from the audio community. And rightfully so. They are, IMHO, among the best values in the speaker world. In addition, if you can find a nice pair used (like I did right here), you can enjoy their goodness for 55% - 60% of retail - truly a smokin' deal if ever there was one.

However, as good as they are, one knock against them has been the height of the soundstage or image. Some folks have said that they find the soundstage to be too low. This is not too surprising considering the fact that they stand only 35" tall.

I have been able to overcome this limitation by using the factory-supplied hardware in a slightly different way than originally intended. Gallo supplies the speakers with 4 cones (spikes) for each speaker. They intend for you to use the taller cones up front and the shorter ones in back. In addition to the cones, they also provide floor protectors to be used under the cones.

What I did was to take the floor protectors from the back cones and double them up with the ones on the front cones. This causes the speakers to tilt back several more degrees. I have not measured the degree of tilt, but it's on the order of 10 degrees or so.

Also, because I have the speakers placed on wall-wall carpeting, the cones in the back of the speakers tend to sink down into the carpet more than they would if they had the floor protectors under them. This results in even more of a tilt. It also causes the speakers to have a very firm grip on the carpet - they will NOT slide sideways at all.

I have found this little (and FREE!!) tweak to be quite satisfying in practice - the soundstage has seemingly risen about 1 ft., just enough to make it quite realistic. If you have the Gallos, give this a try, you might be quite surprised at how effective it is...

-RW-
rlwainwright
hack
185 posts
 
RW,

Another tweak worth trying (set me back $1) is inserting resistors across the "Sub In" terminals.

http://www.10audio.com/gallo_ref3-1.htm

I put some in a few days ago, it does seem to add a little more bottom end to the speakers, so far I like what I hear.

Jeff
danlib1
819 posts
 
Guys;

I sold my Gallo 3.1's recently and I have a pair of the resistors Jeff references above. It definately changed the sound some, but I never made up my mind as to whether it was "better".

Anyway, if anyone wants these 2 resistors for their Gallos, shoot me an email and I'll give 'em to you, mailed US Mail continental USA.
deano
77 posts
 
I do not own these speakers but I know that Mapleshade uses them as their studio monitors. They have developed a speaker stand designed specifically for them. Here is the link:

http://www.mapleshaderecords.com/audioproducts/gallostands.php
kkm
124 posts
 
For the price, $99/pr, the stands that Scott, at Stein Audio, works very well. Just need to work a little to sand and paint. Not affiliated with him, just a happy customer.

http://www.steinaudio.com/CustomerProjects.html

or Bright Stars stands, but they don't seem to be taking any orders at this time:

http://www.brightstaraudio.com/gallo_stands.htm

Best, KK
kkm
124 posts
 
Sorry meant to add the Bright Star link:

http://www.brightstaraudio.com/gallo_stands.htm
More to discover