FR64 cartridge suggestions


Been out of the loop for quite a few years due to some 'life' events, with system in storage.

I have been able to pull my system from storage, and last year worked enough overtime to upgrade or purchase new equipment, but I have not upgraded my turntable/tonearm/cartridge yet.

My turntable is a Technics SL1000 MKII which for those not familiar, is the Technics SP10 MKII turntable mounted on a factory plinth.
I have two Technics B-500 bases with an 'E' armwand and 'H' armwand that I don't use.
The tonearm I do use is a Fidelity Research FR64, so I need a low compliance cartridge.
The cartridge I used last is a vintage Fidelity Research FR-1 MK3 F, which needs to be re-tipped, and I will do so once I get a replacement.

The rest of the system includes:

Zesto 1.2 Andros tube phono stage
Zesto 1.5 tube preamp
Quicksilver V4 tube amps (new KT150 version)
Green Mountain Audio Continuum 3 speakers
JL Audio 113 Fathom subwoofers (pair)

Curious what cartridges other high mass tonearm owners are using, especially those who use Fidelity Research FR64/66 tonearms.

Looking for cartridges under $2000 USD at most.. probably should spend half that.

I have over 20K records, so I am very anxious to get this back into service.

Really curious about suggestions and thanks in advance.



128x128Ag insider logo xs@2xrich121

Showing 1 response by edgewear

It is surprising how many different types of cartridges can work with the FR-64, despite its heavy effective mass. An obvious first choice would be the FR-7 series. You can get an early (silver) FR-7 for around $1000 and the improved FR-7f for around $1500. The FR-7fz and the final MC-702 variations are superior still, but have become quite rare and expensive.

But if you don't fancy hunting down such vintage systems (with all the risk that goes with that territory) I would strongly recommend the Phasemation PP-300 (or earlier P-3G), which you can buy new for around $1500. Truly a marvelous cart and a great match with the FR-64S.