The Aegir and the Vidar both share the same transformer and other parts to keep production costs down. Not the ideal amps to make transformer vs power rating comparisons with.
Filter Capacitance
Hello Audiogonners!
Perhaps this should be placed in tech talk - not sure....
In my own clumsy way, I'm building more understanding of amplifiers. I have no electrical training, save some very awkward swings of that hot gun that interacts with solder and a PCB, back in High School, about 400 years ago!
So, I see there are two players in the amp game that I do not understand, about which I am studying (more study of other pieces of the system, later): Filter capacitance and transformer size. Until a few days ago, I might have (entirely) mixed the two in my head... now it's only a partial mix... So, I'm interested to see, for example, that the Schiit Aegir has the following hardware, so far as is described on a Schiit-Euro site:
"The power supply is completely linear, with 600VA transformer, over 150,000uF of filter capacitance."
That seems like A LOT of capacitance, and I'm totally confounded as to why this doesn't translate into higher output. As you know, the Aegir is described as 20 watts per channel into 8 ohms, and maybe 40 into 4 ohms. Seems like low wattage for all that transformer and capacitance weight!
The Vidar runs the same size transformer but only 40,000uF of filter capacitance - 20K per side! AND it's a 100w into 8ohm amp - 200 into 4ohms.
I own the STA200 by Nuforce and I cannot find anything describing capacitance, nor transformer size... I'm studying amplifier tech because I'm running into some difficulty when running the STA200 into my Moabs, at high volumes characterized by significant bass extension: think giant BOOM and you get the idea. Most of what I listen to is jazz/acoustic, so it's not a big issue until I move over to something that emphasizes boom, so I'm curious as to how the tech shows up in these applications...
Perhaps this should be placed in tech talk - not sure....
In my own clumsy way, I'm building more understanding of amplifiers. I have no electrical training, save some very awkward swings of that hot gun that interacts with solder and a PCB, back in High School, about 400 years ago!
So, I see there are two players in the amp game that I do not understand, about which I am studying (more study of other pieces of the system, later): Filter capacitance and transformer size. Until a few days ago, I might have (entirely) mixed the two in my head... now it's only a partial mix... So, I'm interested to see, for example, that the Schiit Aegir has the following hardware, so far as is described on a Schiit-Euro site:
"The power supply is completely linear, with 600VA transformer, over 150,000uF of filter capacitance."
That seems like A LOT of capacitance, and I'm totally confounded as to why this doesn't translate into higher output. As you know, the Aegir is described as 20 watts per channel into 8 ohms, and maybe 40 into 4 ohms. Seems like low wattage for all that transformer and capacitance weight!
The Vidar runs the same size transformer but only 40,000uF of filter capacitance - 20K per side! AND it's a 100w into 8ohm amp - 200 into 4ohms.
I own the STA200 by Nuforce and I cannot find anything describing capacitance, nor transformer size... I'm studying amplifier tech because I'm running into some difficulty when running the STA200 into my Moabs, at high volumes characterized by significant bass extension: think giant BOOM and you get the idea. Most of what I listen to is jazz/acoustic, so it's not a big issue until I move over to something that emphasizes boom, so I'm curious as to how the tech shows up in these applications...