2. analog
  3. 128511-1637

Feedback through turntable

My system consists of a McIntosh C2300 preamp, MC452 amp, MCD500 SACD player, VPI Aries 3D with Ortofon Cadenza MC cartridge, Manley ChinookSE phono stage, PS Audio P5, Sonus faber Cremona Auditor M speakers and REL B1 Sub bass system.  My issue is with turntable use only; SACD has no issues.  On my pre when volume is +55 (peak at 45watts) I start to get feedback through the turntable - a sort of low freq sound, back off volume and it goes away.  My Auditor M speaker is about 3 ft away and in front of turntable.  I do have a rumble filter (KAB) installed between preamp and phonostage to help with sub woofer pumping.  Due to room layout I cannot rearrange the setup/move turntable.  My turntable is on a 2.5" block of wood and that sits on 4 isolation blocks via spiked feet.  Any thoughts how I can eliminate this problem?  Harry Weisfeld with VPI states he has 4 15" woofers (JBL Everest) near his Prime Signature setup with no issues at all.  Why am I having this problem and how can I eliminate it?  Thank you in advance for all feedback.
miner42
106 responses Add your response
slaw's avatar
slaw
21,443 posts
 
toddverrone,

I saw your picture of the padding. Very similar to non-slip kitchen cabinet mats or tool box padding. Nice.

I've quit following this thread.

Good luck & happy listening!
fstein's avatar
fstein
199 posts
 
Can you wall mount?
miner42 OP
709 posts
 

I can but WAF won't allow.  Plus an +85 lb TT on a wall rack - would not feel comfortable.


I put the REL B1 on an isolation base and this even helped more.

andarilu
23 posts
 
I had a similar issue when I upgraded to the 3d arm. I would start getting a low hum which kept feeding back on itself and getting amplified. I determined that it had nothing to do with vibrations coming through the turntable and everything to do with airborne vibrations hitting the tonearm. I solved the issue by moving my turntable to the side of the room instead of keeping it between my speakers. You can read through the thread I started a while back titled  "Turntable placement".

Good luck.
miner42 OP
709 posts
 
Feedback does not happen when sub is out of the loop.  I do realize the inserts on the mini-HRX feet are rubber - still contemplating replacing those with Symposium inserts.  One other point of contention - the bearing/bell housing on the 3D arm.  I am told the base of the bell housing (where the uni-pivot fits into on the arm) needs to be no more than 1/4" from top of armboard/VTA adjustment base.  Mine was considerably more than that (3/8" approx.).  I lowered mine and readjusted the VTA to bring arm back to parallel with platter then did the fine adjustments.  I was told by VPI the higher the arm is above the VTA base the more unstable it is hence a target for airborne freq.  I have also relocated some equipment and moved sub away from the TT.  All seems well for now.  I guess having my TT set up professionally when I bought it was not the right choice.
woodstock1969
3 posts
 
put all equipment with turntable as far away (another room) from speakers.get awg 8 or10 guage speaker wire and run it to speakers,the further away they are the better and the louder you can play,feedback problem solved(it did for me)
Log in to respond
More to discover
80x80
ZYX UNIverse ii Welcoming
Astro to the family
80x80
MoFi X Fender Precision Deck Limited Edition Turntable
80x80
Lenco Fenrir